Inclined plane translational velocity

AI Thread Summary
A hollow cylinder with a mass of 1.2 kg and a diameter of 0.25 m rolls down a 35-degree inclined plane, traveling 3 meters. The height calculated from the incline is approximately 1.72 m, leading to a translational velocity of about 4.1 m/s using the equation v = √(gh). The discussion emphasizes the conservation of energy principle, equating potential energy at the top with kinetic energy at the bottom. The relationship between translational and angular velocity is also highlighted, with the final equation confirming that the calculated velocity is correct. The key takeaway is the effective application of energy conservation to determine the translational velocity of the cylinder.
davidelete
Messages
28
Reaction score
0

Homework Statement


A hollow cylinder with a mass of 1.2 kilograms and a diameter of .25 m rolls down an inclined plane angled at 35 degrees. What is its translational velocity at the bottom of the incline plane if the distance traveled is 3 meters?

Homework Equations


v=\sqrt{gh}
?

The Attempt at a Solution


sin35=h/3m
h=1.72m
v=\sqrt{9.8*1.72}
4.1 m/s
 
Physics news on Phys.org
According to the conservation of energy,
mgh = 1/2*Iω^2 + 1/2*m*v^2.
here h = d*sinθ. The angular velocity v =ω*R, where R is the radius of the cylinder.
 
Last edited:
rl.bhat said:
According to the conservation of energy,
mgh = 1/2*Iω^2 + 1/2*m*v^2.
here h = d*sinθ. The angular velocity ω = v*R, where R is the radius of the cylinder.

I need translational velocity.
 
davidelete said:
I need translational velocity.
v is the translational velocity of the center of mass.
 
rl.bhat said:
v is the translational velocity of the center of mass.

Please explain more.
 
According to the conservation of energy
K1 + U1 = K2 + U2
0 + mgh = 1/2*m*v^2 + 1/2I*ω^2.
mgdsinθ = 1/2*m*v^2 + 1/2MR^2(v/R)^2 + 0
So mgdsinθ = mv^2.
So what ever you have calculated is the required result.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top