Intensity from the double slit.

AI Thread Summary
The discussion focuses on deriving the intensity expression for laser light passing through a double slit setup. The initial attempt at the solution presented an intensity formula, but confusion arose regarding the factor of 4 in the expression. Clarification was provided that this factor depends on the definition of maximal intensity, either from a double slit or a single slit perspective. Additionally, when examining the case where the distance between slits equals their width, it was noted that this does not yield a double slit pattern. The final derivation confirmed that with specific substitutions, the intensity formula aligns with the single-slit diffraction pattern for a slit width of 2a.
sg001
Messages
134
Reaction score
0

Homework Statement



Laser light of wavelength λ is incident onto a pair of narrow slits of width a and spacing dWrite down an expression for the intensity as a function of angle of the angle measured from the central axis, θ, in the far-*‐field

Homework Equations


The Attempt at a Solution



I thought it was just the product of single and double slit diffraction, i.e...

I= I0cos2(∏dsinθ/λ)(sin(∏asinθ/λ)/∏asinθ/λ))2but the answer was I= 4I0cos2(∏dsinθ/λ)(sin(∏asinθ/λ)/∏asinθ/λ))2im not sure where this 4 has come from??

also how would I show if d=a then this formula turns into the double slit pattern.??
 
Last edited:
Physics news on Phys.org
The prefactor depends on the definition of I0.
If you define it as "maximal intensity with a double-slit", the prefactor is 1.
If you define it as "maximal intensity with a single slit", it is 4.

also how would I show if d=a then this formula turns into the double slit pattern.??
If the distance between the slit centers is equal to the slit size, why would you expect a double slit pattern?
 
mfb said:
The prefactor depends on the definition of I0.
If you define it as "maximal intensity with a double-slit", the prefactor is 1.
If you define it as "maximal intensity with a single slit", it is 4.


If the distance between the slit centers is equal to the slit size, why would you expect a double slit pattern?

Thanks,

sorry it should have been single slit with width 2a... but when I plug in d=a I can't see how that could disappear?
 
With ##x=\frac{\pi a \sin(\theta)}{\lambda}##:

$$I= I_0\cos^2\left(\frac{\pi d \sin(\theta)}{\lambda}\right) \frac{sin^2(x)}{x^2}$$
With d=a and using sin(2x)=2sin(x)cos(x):
$$I= I_0 \frac{\cos^2(x) sin^2(x)}{x^2} = I_0 \frac{1}{4} \frac{sin^2(2x)}{x^2} = I_0 \frac{sin^2(2x)}{(2x)^2}$$
Which is the single-slit pattern with 2a.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...

Similar threads

Back
Top