Is a Rack and Pinion Arrangement Suitable for an RC Car Steering Mechanism?

AI Thread Summary
A rack and pinion arrangement can be suitable for an RC car steering mechanism, although finding the correct size may pose a challenge. While the principles of automobile steering can be applied, they may be too heavy for an RC car. Many users suggest that go-kart type steering might be a more effective alternative. The discussion emphasizes that the actual mechanism for turning the wheels is relatively straightforward, but the actuation method needs careful consideration. Overall, there are various options available for RC steering systems, and seeking specialized manufacturers is advisable.
R@mbo
Messages
2
Reaction score
0
hello guys..i'm trying to make my first rc car..but m not getting the steering mechanism for it..is the steering mechanism for real cars applicable on it..?:confused::mad::rolleyes:
 
Engineering news on Phys.org
welcome
can you used the steering mechanism from an automobile on your RC..??

you can but it would be pretty heavy..

seriously .. the linkage principles can be applied ( these were derived from horse and buggy designs as a matter of fact)

there are numerous RC racers on this post..just ask them
rm
 
thanx buddy...but i was just asking about the principle..using pinion and rack..
 
You could of course use a rack and pinion arrangemnt. Getting something the correct size might be tricky. There has to be manufacturers who make RC steering arrangements. I would have thought that a go cart type steering would be better.

The acutaly physical mechanism for turning the wheels is the easy bit.

How are you actuating the system?
 
Last edited:

Thread 'Bubble formation in 4 mm gap vessel'

How did you find PF?: Via Google search Hi, I have a vessel I 3D printed to investigate single bubble rise. The vessel has a 4 mm gap separated by acrylic panels. This is essentially my viewing chamber where I can record the bubble motion. The vessel is open to atmosphere. The bubble generation mechanism is composed of a syringe pump and glass capillary tube (Internal Diameter of 0.45 mm). I connect a 1/4” air line hose from the syringe to the capillary The bubble is formed at the tip...
View full post »
Thread 'Calculate minimum RPM to self-balance a CMG on two legs'

Thread 'Calculate minimum RPM to self-balance a CMG on two legs'

Here is a photo of a rough drawing of my apparatus that I have built many times and works. I would like to have a formula to give me the RPM necessary for the gyroscope to balance itself on the two legs (screws). I asked Claude to give me a formula and it gave me the following: Let me calculate the required RPM foreffective stabilization. I'll use the principles of gyroscopicprecession and the moment of inertia. First, let's calculate the keyparameters: 1. Moment of inertia of...
View full post »
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
View full post »

Similar threads

Auto/Motor Design to 3D print RC car - Steering
Replies
8
Views
5K
Steering Mechanism for 40KG Battle Robot
Replies
8
Views
6K
Is Non-mechanical Steering the Future of Electric Cars?
Replies
17
Views
5K
Inertia of the drivetrain components of a 4x4 vehicle
Replies
15
Views
3K
Explanation of the mechanics of a rack and pinion system?
Replies
3
Views
3K
Replacing Plastic Push Pin Clips With Rivnuts in Car
Replies
7
Views
2K
The cost estimate of rack and pinion used in power steering system
Replies
2
Views
2K
Prototype 3-Wheeled Car Steering Mechanism
Replies
10
Views
6K
Ball bearing cantilever system with maximal moment of inertia
Replies
16
Views
2K
Spring+mass to do known job. How dimension? Impulse? Energy?
Replies
18
Views
2K

Hot Threads

Recent Insights

Back
Top