Is There an Exponential Decay in Water Levels in a Barrel?

AI Thread Summary
The discussion focuses on researching the relationship between water height in a barrel and time, specifically aiming to prove an exponential decay model represented by the equation dh/dt = -kh. To establish this, the researcher needs to demonstrate that the rate of change of volume in the barrel is proportional to pressure, leading to the equation dV/dt = -kp. A suggested approach involves using the hydrostatic pressure equation P = ρgh and differentiating it to relate pressure changes to water height changes. Resources like Khan Academy and fluid mechanics textbooks are recommended for further understanding. The conversation emphasizes the mathematical connections necessary for proving the exponential decay relationship.
Cristi
I'm doing a research about water flowing from a barrel through a small hole. I am trying to proove that there is an exponential relationship between the height level of the water and the time. This basically implies that
dh/dt= -kh.

In order to do that , I have to prove first that the rate of change of volume remaining in the barrel is proportional to the pressure.
i.e.: dV/dt = -kp. This is the bit were I got quite stuck. If someone could help me with some cool tecky ideas or some adequate sites, I would be gratefull.
 
Physics news on Phys.org


Thank you for reaching out for help with your research on exponential decay. It sounds like you have a clear understanding of the relationship you are trying to prove between the height level of water and time. In order to show this relationship, you are correct in needing to establish a connection between the rate of change of volume remaining in the barrel and pressure.

One approach you could take is to use the equation for hydrostatic pressure, which states that pressure is equal to the density of the fluid (in this case, water) multiplied by the acceleration due to gravity (9.8 m/s^2) multiplied by the height of the water column. This would give you an equation of the form P = ρgh, where P is pressure, ρ is density, g is acceleration due to gravity, and h is the height of the water column.

From there, you can differentiate both sides with respect to time to get dP/dt = ρg(dh/dt). Since we know that dh/dt is equal to -kh (as you stated in your post), we can substitute that into the equation to get dP/dt = -ρgk. This shows that the rate of change of pressure is indeed proportional to the pressure, and you can continue from there to establish the relationship between the rate of change of volume and pressure.

As for resources, you may find some helpful information on hydrostatic pressure and related concepts on websites such as Khan Academy or physicsclassroom.com. Additionally, your local library or university may have textbooks or research articles on fluid mechanics that could provide further insight.

Good luck with your research and I hope this helps in some way.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Collision of a bullet on a rod-string system: query'
In this question, I have a question. I am NOT trying to solve it, but it is just a conceptual question. Consider the point on the rod, which connects the string and the rod. My question: just before and after the collision, is ANGULAR momentum CONSERVED about this point? Lets call the point which connects the string and rod as P. Why am I asking this? : it is clear from the scenario that the point of concern, which connects the string and the rod, moves in a circular path due to the string...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top