Kinematics In One Direction Problem

AI Thread Summary
A runner aims to complete a 10,000m run in under 30 minutes but has 1100m left after 27 minutes. The initial speed is calculated as 5.5 m/s, but the runner needs to accelerate at 0.20 m/s² to meet the time goal. The discussion highlights the need to break the remaining time into two segments to find the acceleration duration. Key equations involve relating distance, initial velocity, acceleration, and time. The focus is on determining how long the runner must accelerate to finish the race in the desired time.
Mazero
Messages
8
Reaction score
0
A runner hopes to compleate the 10,000m run in less than 30.0min. After running at a constant speed for exactly 27.0min there are still 1100m to go. The runner must then accelerate at 0.20 m/s^2 for how many seconds in order to achieve the desired time.

Ill briefly summarize what i tryed...

Init. Velocity = (10,000-1100) /(27min * 60s) = 5.5 m/s
Final Velocity = 1100/(180-t) since t is not know, because i don't know yet how long it will accelerate for

i was then going to use VF^2 = VI^2 + 2ad to find the distance it must accelerate for, and use that to find the time, this seems rather wrong, hence my confusion, but i figured id give my idea anyway
 
Physics news on Phys.org
Mazero said:
Init. Velocity = (10,000-1100) /(27min * 60s) = 5.5 m/s
Good. This is the speed of the runner for the first 27 minutes.
Final Velocity = 1100/(180-t) since t is not know, because i don't know yet how long it will accelerate for
Don't worry about the final speed, since that's not asked for. You know the distance and time for the last leg of the run, and you need to find the acceleration. The kinematic equation that relates these three variables is:
x = v_0 t + 1/2 a t^2
 
I think you misunderstood the question, i need to know how long he accelerates, in order to finish in 3 mins, if you read the question more closely youll realize its not as simple as i thought, i immediatly did what you suggested, until somone else pointed out the other details
 
Mazero said:
I think you misunderstood the question, i need to know how long he accelerates, in order to finish in 3 mins, if you read the question more closely youll realize its not as simple as i thought, i immediatly did what you suggested, until somone else pointed out the other details
Oops... my bad. I forgot that the acceleration was given.

So break the remaining 3 minutes into two segments t_1 and t_2. Assume the final speed is v_f. So:
v_f = v_0 + a t_1
t_1 + t_2 = 180
I'll leave the last for you: total distance traveled during t_1 + t_2 = 1100 m.

I hope that helps.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Back
Top