Lead-Lag Network: Series RC & Parallel RC Combinations

  • Thread starter Thread starter mkbh_10
  • Start date Start date
  • Tags Tags
    Lead Network
mkbh_10
Messages
217
Reaction score
0
How is a series RC network acting as a lead network & a parallel RC combination acting as a lag network ?
 
Physics news on Phys.org
a good start would be to write down the complex impedances of each
 
It depends on how the RC network is connected to the load. For example, if R and C is added in series with the load, then the phase angle of the load current will increase. If C is in parallel with the load and R is in series with both, then the phase angle will decrease. However, if R is in parallel with C and the combined network is in series with the load, the phase angle of the load will increase.
 
How is this phase angle increasing & decreasing , that i want to know .
 
Hi, I had an exam and I completely messed up a problem. Especially one part which was necessary for the rest of the problem. Basically, I have a wormhole metric: $$(ds)^2 = -(dt)^2 + (dr)^2 + (r^2 + b^2)( (d\theta)^2 + sin^2 \theta (d\phi)^2 )$$ Where ##b=1## with an orbit only in the equatorial plane. We also know from the question that the orbit must satisfy this relationship: $$\varepsilon = \frac{1}{2} (\frac{dr}{d\tau})^2 + V_{eff}(r)$$ Ultimately, I was tasked to find the initial...
The value of H equals ## 10^{3}## in natural units, According to : https://en.wikipedia.org/wiki/Natural_units, ## t \sim 10^{-21} sec = 10^{21} Hz ##, and since ## \text{GeV} \sim 10^{24} \text{Hz } ##, ## GeV \sim 10^{24} \times 10^{-21} = 10^3 ## in natural units. So is this conversion correct? Also in the above formula, can I convert H to that natural units , since it’s a constant, while keeping k in Hz ?
Back
Top