Learn Engineering Mechanics - Moment Definition & Resources

AI Thread Summary
A moment in engineering mechanics is defined as a vector representation of torque, crucial for understanding statics. Recommended resources for learning include MIT's course materials on mechanics of materials and Cornell's statics guide, which explain concepts like shear and bending moments. Additionally, the book "Vector Mechanics for Engineers" by Beer and Johnston is highly suggested for its educational value. These resources provide foundational knowledge necessary for mastering engineering mechanics. Engaging with these materials will enhance understanding of moments and their applications in statics.
garagegraphyx
Messages
12
Reaction score
0
I am currently learning engineering mechanics and on the subject elementary of statics. I am very confused about what a moment is...
i need a recommendation of a good website that can teach me these stuffs.

Thank you!
 
Engineering news on Phys.org
A moment is essentially a vector description of a torque.

http://ocw.mit.edu/NR/rdonlyres/Materials-Science-and-Engineering/3-11Mechanics-of-MaterialsFall1999/AA9A4B36-AF87-415B-B3B4-6A0FE0638BCA/0/statics.pdf might be jumping ahead a little, but here is a description of what's going on with a cantilevered beam.

http://instruct1.cit.cornell.edu/courses/arch264/text/ch1statics/1.7.html is another:

Essentially, you have two force components: shear and bending moment.
 
Last edited by a moderator:
Miri,

Take a look on a book entitled "Vector Mechanics for Engineers", authors Beer & Johnston. This book is very educative. You will not regret at.
 

Thread 'Query on Isentropic relationships (such as PV^gamma = constant)'

Hi all, I have a question. So from the derivation of the Isentropic process relationship PV^gamma = constant, there is a step dW = PdV, which can only be said for quasi-equilibrium (or reversible) processes. As such I believe PV^gamma = constant (and the family of equations) should not be applicable to just adiabatic processes? Ie, it should be applicable only for adiabatic + reversible = isentropic processes? However, I've seen couple of online notes/books, and...
View full post »

Thread 'Dry sump pump issue'

I have an engine that uses a dry sump oiling system. The oil collection pan has three AN fittings to use for scavenging. Two of the fittings are approximately on the same level, the third is about 1/2 to 3/4 inch higher than the other two. The system ran for years with no problem using a three stage pump (one pressure and two scavenge stages). The two scavenge stages were connected at times to any two of the three AN fittings on the tank. Recently I tried an upgrade to a four stage pump...
View full post »

Similar threads

How to model the behavior of a closed loop position system?
Replies
9
Views
3K
What is Artificial Intelligence?
Replies
10
Views
3K
Change the application pole of the moment of a force
Replies
18
Views
2K
Are Short Links and Weightless Links the Same in Engineering Mechanics?
Replies
13
Views
4K
Ansys tools for different software applications
Replies
2
Views
2K
Mechanical Engineering projects
Replies
2
Views
1K
3"x3" steel tube, Structural engineering question
Replies
12
Views
850
Engineering Software for Mechanical Simulations
Replies
1
Views
2K
Learning physics beyond classical mechanics without labs?
Replies
18
Views
326
Resources to broaden knowledge of basic engineering
Replies
4
Views
2K

Hot Threads

Recent Insights

Back
Top