Learn How to Solve a Difficult Homework Question on Hooke's Law

  • Thread starter Thread starter charikaar
  • Start date Start date
  • Tags Tags
    Hooke's law Law
AI Thread Summary
The discussion revolves around solving a homework problem related to Hooke's Law, involving a 180g trolley attached to a spring with a spring constant of 50 N/m. Participants calculate the initial acceleration of the trolley using F=ma and find the initial energy stored in the spring using the formula W=1/2kx^2. There is some confusion regarding the correct application of formulas and unit conversions, particularly in determining the force and energy calculations. The final speed of the trolley is linked to the transformation of potential energy into kinetic energy, with participants seeking clarification on the equations needed for the solution. Overall, the thread highlights the challenges faced by students in understanding the principles of physics and applying them correctly.
charikaar
Messages
5
Reaction score
0
Hello,

I found one of my this homework question difficult and was wondering if anyone could please help me.

A 180g trolley is placed on frictionless air track. One end of the trolley is attached to a spring of spring constant 50 N/m. The trolley is pushed against a fixed support so that the compression of the spring is 8 cm. The trolley is then released.

(a) What is the initial acceleration of the trolley when it is released?
(b) What is the initial energy stored in the spring?
(c) Calculate the final speed of the trolley along the frictionless track. You may assume that there is 100% transfer of energy from the spring to the trolley.

Any help would greatly be appreciated.



charikaar
 
Physics news on Phys.org
(a) F = ma
(b) W = \frac{1}{2}kx^2 You can obtain that by integrating, but I'm not sure if you're familiar with that stuff.
(c) Energy principle
 
hello,

Thanks for the quick reply.


Mass of trolley: 180g or 0.18 kg

compression: 8cm or 0.08m

Using F=extentionxconstant to find Force
50/0.08=625N

Now using F=ma to find acceleration

625/0.18=3472.22...Am i correct?

(b) using W=1/2kx^2

25x0.64=16J

(c) I've no idea how to start this one.


thank you.


Charikaar
 
(a) Instead of calculating the force right in the beginning, solve the problem with the letters, and into the final equation, plug in the requested stuff. Oh, and F = -kx, not -k/x
(b) Are you using SI-units? I got a different answer.
(c) What sort of energy does the potential energy of the spring transform into?
 
Last edited:
Hi again,

I've just started AS physics and am not familiar with this stuff much. I don't know where does my teacher get these question from when they are not in the book.


(a) k=50 N/m, x=0.08 m using F=kx, F=50x0.08=4N

Now using F=ma to acceleration
a=F/m, 4/0.18=22.22...N/mkg


(b) This is AS Physics question.
Elastic Potential Energy=1/2xstretching forcexextension
=1/2x8x0.08=0.32J




(c)I think it transfers to energy of movement. Could you please give me equation for the solution.


Thanks for your help.


Charikaar
 
(a) Correct. From F = ma, we can see that the unit of F is kgm/s^2 This divided by kg, we get m/s^2, which is the unit of acceleration.
(b) My answer's half that.
(c) Kinetic energy: \frac{1}{2}mv^2.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...

Similar threads

Back
Top