Length Contraction spaceship Problem

AI Thread Summary
A spaceship traveling at 0.750c has a measured length of 28.2 m, and the question asks for its rest length. The relevant equation for length contraction is L = L_0 * sqrt(1 - v^2/c^2). A participant initially calculated the rest length incorrectly as 18.65 m, but it was clarified that they needed to solve for L_0 instead. The correct approach leads to a rest length of 42.6 m, with a reminder that the square root must be applied in the calculations. The discussion emphasizes the importance of correctly identifying variables in relativistic equations.
hbrinn
Messages
4
Reaction score
0

Homework Statement


A spaceship passes you at a speed of .750c. You measure its length to be 28.2 m. How long would it be when at rest?


Homework Equations


I think the equation that is relevant is L=L(sub0)xsqrt(1-v^2/c^2)


The Attempt at a Solution


L=28.2xsqrt(1-(.75^2))=18.65m
Apparently, the answer is 42.6 m. I can't even imagine how to get 42.6 from that.
 
Physics news on Phys.org
hbrinn said:

Homework Statement


A spaceship passes you at a speed of .750c. You measure its length to be 28.2 m. How long would it be when at rest?


Homework Equations


I think the equation that is relevant is L=L(sub0)xsqrt(1-v^2/c^2)


The Attempt at a Solution


L=28.2xsqrt(1-(.75^2))=18.65m
Apparently, the answer is 42.6 m. I can't even imagine how to get 42.6 from that.

I think you just got your variables swapped. If you are using

L = L_0 {\sqrt{1 - \frac{v^2}{c^2}}

then L is 28.2 m, and you need to solve for L_0, the length when the relative velocity is 0. L is the length when traveling at speed v.
 
Then by that logic isn't the answer 64.457?

I did 28.2=L(1-.75^2). Is that wrong?
 
hbrinn said:
Then by that logic isn't the answer 64.457?

I did 28.2=L(1-.75^2). Is that wrong?

You forgot to take the square root. :-p
 
You forgot the square root.
 
Yay! Thank you very much!
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...

Similar threads

Back
Top