Magnitude of the rate of change of momentum of water

AI Thread Summary
The discussion revolves around calculating the rate of change of momentum of water from a fire hose delivering 1464 gallons per minute at a velocity of 92 m/s. The user has attempted to convert gallons to kilograms using a density of 1 kg/L, resulting in a mass flow rate of approximately 92.38 kg/s. However, their calculated momentum change of -8498.8 N was marked incorrect by the homework program, leading to confusion about the conversion factors and whether to input the answer as positive or negative. Participants suggest verifying the conversion from gallons to kilograms and confirm that the initial velocity is indeed 0 for momentum calculations. The user is seeking clarification on these calculations as they have already exhausted several submission attempts.
JadeBunny
Messages
3
Reaction score
0
Rate of change of momentum

Homework Statement



Hey everybody this is my first post and I really hope you guys can help me out. Ok so here's the problem which is divided into three parts:

The first part consists of this: A fire hose sends 1464 gallons of water perminutre against a burning building at 92 m/s and does not bounce back. What is the magnitude of the rate of change of momentum of the water. Answer in Newtons.

The second part which I've figured out asks whether the rate of change of momentum of the water cannot be determined, is positive or negative. The answer is that it's going to be negative.

The third part consists of finding the once exerted by the water in 1.7 minutes.

Homework Equations


I know thus far that momentum or delta p = mass x velocity


The Attempt at a Solution



So far I've tried converting the amount of water given into a mass given that the density of water is 1kg/L which gave me a value of 3.786 kg/gal which I used with 1 min= 60 sec to convert the gal/min value into 92.38 kg/sec

I multiplied this by the velocity given (vf-vi= -92) and got a value of -8498.8 N, which when I inputted into the online homework program said was incorrect.

I've been working on this for several hours now and am currently stuck at this moment. The assignment is actually due the 23rd but the answers need to be submitted well before then. Any insight anybody could give me would be greatly appreciated. Thanks!
 
Last edited:
Physics news on Phys.org
I'm getting the same answer as you... I suspect the problem is with the conversion from gallons to kg... I'm trying to find the conversion...
 
maybe use 3.78541178 kg/gallon ? changes the last few decimal places...

these are US units right? not UK units I'm guessing...
 
well we've been using the metric system thus far. I'm suspecting that the conversion rate might be off but I've yet to be able to verify that.
 
Did you enter -8498.8 N or 8498.8 N.

The first part asks for the magnitude, so you need to enter the positive value...
 
Yes I put it in positive form and it's still wrong. The thing is the program the homework is on only let's you submit an answer a max of 7 times, thus far I've tried three answers and they've all been wrong. They were: -8498.81, 8497.49, -4726.54

My question now is are we sure this is the right way to convert to mass for the water and the velocities: our inital will be 92 right, so the initial I'm presuming is 0 but is that right?
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top