Maximizing Volleyball Projectile Motion: Calculating Speed and Height

AI Thread Summary
To determine the initial speed required for a volleyball to land on the opponent's back line, the player must account for the height difference and the angle of projection. The equations of motion indicate that the horizontal and vertical components of the ball's trajectory must be analyzed separately. The vertical distance the ball must clear is 0.91 m, and the total horizontal distance is 18 m. The time taken for the ball to travel horizontally must equal the time taken for its vertical motion, which involves reaching a maximum height and then descending. Understanding these components and applying the appropriate equations will help solve the problem effectively.
jap90
Messages
4
Reaction score
0
A regulation volleyball court is L = 18.0 m long and a regulation volleyball net is d = 2.43 m high. A volleyball player strikes the ball a height h = 1.52 m directly above the back line, and the ball's initial velocity makes an angle q = 55° with respect to the ground. At what initial speed must the ball be hit so that it lands directly on the opponent's back line? and What is the maximum height reached by the ball in this case?

I'm really stumped, if anyone can give me some help it would be greatly appreciated. thanks
 
Physics news on Phys.org
What can you tell us about the equations of motion that apply to this problem? Assuming no air resistance, what are the vertical and horizontal components of motion? You need to show us your work in order for us to help you.
 
well, I know that the height the ball has to travel in order to clear the top of the net is .91 m. I'm not sure if this even matters in this problem.
the Vxo=cos55 v
Vyo=sin55 v
the total distance the ball has to travel is 18m. Where my problem lies is with the initial height difference of 1.52 m. I don't know how to compensate for that. I've tried solving for t, but i don't know how to go about since the ball drops below its starting point. I've spent hours on this problem and still no luck. Anything you could tell me to get me started on the right path?
thanks
 
Are you familiar with these equations of motion?

d = d_0 + v_0 t + \frac{a t^2}{2}

v = v_0 + a t

One way to solve the problem is to figure out how long it takes the v-ball to travel the court distance horizontally, and how long it takes it to travel vertcially up and then back down to hit the ground. Those two times have to be equal in this problem. Use the sin and cos components for the initial velocity.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top