Maximum compression in a spring

AI Thread Summary
The problem involves two carts colliding elastically on a frictionless track, with one cart initially moving and the other at rest. After the collision, the red cart's velocity is calculated to be 0 m/s, while the blue cart's velocity is 3.13 m/s. The maximum compression of the spring can be determined using the conservation of energy principle, equating the initial kinetic energy of the blue cart to the potential energy stored in the spring at maximum compression. The relevant equation is 1/2 mv^2 = 1/2 kx_max^2, where the blue cart's velocity is 0 at maximum compression. This approach allows for the calculation of the spring's maximum compression based on the system's energy before and after the collision.
Knfoster
Messages
45
Reaction score
0

Homework Statement



Two carts of equal mass, m = 0.300 kg, are placed on a frictionless track that has a light spring of force constant k = 48.9 N/m attached to one end of it. The red cart is given an initial velocity of v0 = 3.13 m/s to the right, and the blue cart is initially at rest. If the carts collide elastically, find the magnitude of the velocity of the red cart just after the first collision. Find the magnitude of the velocity of the blue cart just after the first collision.
Find the maximum compression in the spring.

Homework Equations


pe=1/2*k*change in x
m1v1=m2v2

The Attempt at a Solution


THe velocity of the red cart after the first collision=0 m/s
the velocity of the blue cart after the first collison=3.13 m/s
I don't know how to find the maximum compression in the spring... Please help. Thanks.
 
Physics news on Phys.org
Okay, I have done some work with this before, but if I'm wrong, I hope someone else can correct me. When two objects collide elastically, they naturally compress and kind of stick together momentarily. In this case, the collision acts like an inelastic collision, which causes some of the energy of the system to be stored in the spring. So, if you treat that system during the collision as inelastic you get the velocity of the two carts (together) to be 1.57 m/s and the KE to be 0.735 J. The total energy of the system is 1.47 J. Using these values with the conservation of energy, you should be able to calculate the maximum compression in the spring.
 
The maximum compression of the spring should occur at the point when the two bodies come to a common velocity. At this point, one body will have lost velocity and the other will have gained, and they will be at their point of closest approach to each other, ie, the maximum compression of the spring. Thereafter, the spring begins to expand and the velocities begin to separate.
 
If I'm interpreting the problem correctly, I believe you just have to find the compression of the spring when all of the kinetic energy of the blue cart is put into the compression of the spring.

As you said.. after the collision:
The velocity of the red cart is 0 m/s
The velocity of the blue cart is 3.13 m/s

Thus you know the total energy of the system before the blue cart hits the spring. This is equal to the energy
of the system after it hits the spring.
\frac{1}{2}mv^{2}=\frac{1}{2}kx_{max}^{2}

(the velocity of the blue cart is 0 at the max compression... that is why there is no \frac{1}{2}mv^{2} term on the RHS)

Hope it helps!
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top