Need Help in making a slow descending yo yo for science club presentation

AI Thread Summary
The discussion focuses on creating a yo-yo that descends slowly for a science club project, emphasizing the need to avoid mechanical friction and air resistance. The main strategies proposed include maximizing rotational inertia and inducing counter torque, with suggestions for using water flow or magnets to achieve the latter. Participants discuss the possibility of using a gasket to create friction on the string or filling the yo-yo with a viscous substance to slow the unwinding process. Clarifications about the design requirements indicate that the yo-yo does not need to resemble a traditional model, as long as it adheres to the project's rules. The conversation encourages experimentation with various materials and methods to optimize the yo-yo's performance.
physics094
Messages
3
Reaction score
0
Hey everyone! I am trying to lead a science project for my science club and I found this great one online. Basically, students must make a yo-yo that takes the longest amount of time to descend 2.0 meters. Any pulleys, gears, mechanical friction, or air resistance may not play a part in the slowed descent.

Now my problem is that I am trying to design a yo yo that would wow the observers after their project bit is over. I have thought of two ways to approach this project: 1) maximize rotational inertia 2) create a counter torque to that of that induced by the string.

I am planning to combine both ideas by 1) connection two hollow cylinders (have the highest moment of Inertia) with a much thinner axle.

The second is what I need help with. I need to induce a counter torque. I have thought of two ways, either using water that flows in a tube that surrounds the rims of the cylinders or using magnets. The only problem is how to induce water flow in a specific direction. If the string is making the system spin clockwise, how would i induce some sort of water flow counterclockwise? Please help me!


Also, I wasn't sure where to post this so please help me redirect it to the appropriate location.'

Thanks!
 
Physics news on Phys.org
Does it have to work like a yoyo - in other words does the entire object have to rotate and be constructed of two cylindrical sides attached by a center rod? Do you want to make it the same size as a traditional yoyo? I assume it has to fall to qualify?

You could seriously slow it down by making a gasket to fit between the two sides to produce friction on the string as it unwinds. I'd probably use silicone sealer - the real aquarium stuff - since you can trim it and shape it

You could also create a center movable cover and fill it with some very sticky substance - vaseline, STP oil treatment - so the string will unwind through the fluid.
 
It pretty much has to unwind on the string. Does not have to look like a traditional yoyo. The dimensions are max of 20 cm each way. The rules are that no friction can be applied. The solution has to deal solely with torque and angular momentum
 
yoyos already have friction so I would assume the rules mean no unusual friction. Can you fill the two sides with a fluid?
 
Yes that was what i was thinking. What do u have in mind?
 
I'd try a bunch of different things from a lead rim, bb's to STP oil treatment,water, ice water slush, hamsters in a wheel? hahaha
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top