Need some help with this Physics problem

  • Thread starter Thread starter Kadaj
  • Start date Start date
  • Tags Tags
    Physics
AI Thread Summary
The discussion revolves around solving a physics problem involving magnetic and electric fields, as well as the tension in strings. The original poster struggles with the calculations related to the forces acting on wires due to tension and magnetic repulsion. They calculate a current of 91.8A and a horizontal force of 1.29, but seek confirmation on their approach and results. Respondents advise checking the calculations, particularly the units for the horizontal force, and provide insights on the relationships between tension, weight, and forces. Accurate calculations are emphasized as crucial for verifying the solution.
Kadaj
Messages
8
Reaction score
0
Hi,
I have a problem here that I'm having trouble with, I attempted to do it by using equations dealing with magnetic fields and electric fields, but then i had to consider the tensions of the strings and the components and became lost. Can anyone help me?

Thanks in advance,

Here is the problem:
http://img.villagephotos.com/p/2004-9/824584/stupid5.jpg

Thanks again
 
Physics news on Phys.org
Consider the weight of some length of the wires. The tension in the string has to support the weight and pull the wires together. If T is the tension, the weight is T cos (7.5) and the horizontal force is T sin (7.5) The horizontal force from the tension is equal to the force of repulsion due to the currents.
 
ok, I did what you said and got the current as 91.8A, but is this right? I found the horizontal force to be 1.29 and the length between the wires to be .0259 meters, then i used the equation, F/L= (permeability of freespace)(I^2)/ 2(pi)r, and I took the force and multipled it by the .050 kg/m then solved for the I in the equation. Is this right? or is there something I;m doing wrong.

Thanks for the help
 
Chances are pretty good when you do a multiple choice question and get exactly one of the answers, you have done it right. You have the right equation for F/L. I don't know what your units are for a horizontal force of 1.29. Do you mean force per unit length in N/m? Something else? I don't see 1.29 coming out of the numbers. The horizontal force on each wire is about .132 times the weight, with the tension in the string being about 1.00863 times the weight. Check your calculations, and then believe them.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top