Need to interview a Mechanical Engineer for project.

AI Thread Summary
A high school junior is seeking to interview a mechanical engineer for a college research project focused on the mechanical engineering field. Key questions include job title, average starting salary, daily equipment use, stress levels, work-life balance, and career advancement timelines. One engineer shared insights about a starting salary around $55,000, six years of experience, and the importance of attitude in managing stress. The engineer emphasized that career advancement is expected within 5-10 years, with potential for significant earnings. Overall, the discussion highlights the challenges and rewards of pursuing a career in mechanical engineering.
Engineering10
Messages
2
Reaction score
0
I am a junior in high school looking to get into the mechanical engineering field. I have a college research project where I need to find information about the career I wish to do. Part of the project involves me interviewing someone already in the field I have chosen. It's just a few simple questions, and I would greatly appreciate it if someone could answer these.

Thanks in advance.

What is your job title and where do you work?


Do you know an average starting salary? If you wouldn't mind, could you state yours?


How long have you been in the engineering field?


What type of equipment do you work with on a day to day basis?



Is what you do very stressful? If so, do you have any tips on how to cope with it?


Is it hard to balance your work life with your personal life?


What do you like most about your job? What do you like least about your job?


What is an expected time line for career advancement?



Did you find going through college difficult? Do you have any tips on how to adjust with the classes?



Was it hard to find a job once out of college?


What advice would you give a student planning on entering this career?



Again, thanks in advance, and I hope it isn't too much!
 
Engineering news on Phys.org
I studied aeronautical engineering (basically mechanical with a few different courses in the final years) in South Africa and I now work in europe (Belgium). I'm not sure if this is suitable for your questionaire. It sounds like you could probably do better with someone from the US. If it is, then PM me and I'll supply with what information I can.
 
That will be fine. Any input you have will help me greatly.
 
Sorry I missed this before...
Engineering10 said:
I am a junior in high school looking to get into the mechanical engineering field. I have a college research project where I need to find information about the career I wish to do. Part of the project involves me interviewing someone already in the field I have chosen. It's just a few simple questions, and I would greatly appreciate it if someone could answer these.

Thanks in advance.

What is your job title and where do you work?
Mechanical project engineer/design team leader and I work for an HVAC design firm.
Do you know an average starting salary? If you wouldn't mind, could you state yours?
I suspect the starting salary for my firm, with a BS in Mech E would be around $55k, but I'm not sure. I've been working in the field for 6 years and have gotten pretty decent raises every year...
How long have you been in the engineering field?
Six years, not including some light (but real) work in the field in high school and college.
What type of equipment do you work with on a day to day basis?
I recently changed jobs and don't use as much as I used to, but about once a week I would use airflow and temperature measuring devices.
Is what you do very stressful? If so, do you have any tips on how to cope with it?
Generally no, but with my new job and increased responsibility, it has been a little. The main thing is to simply accept the fact that work is work and as long as you do a good job, you'll eventually be rewarded for it. Then you won't let the potentially stressful things bother you. Put another way, stress is caused by stressing. If you don't stress about things, you won't feel stress. It is entirely a matter of attitude.
Is it hard to balance your work life with your personal life?
My industry seems very good at paying people for the hours they work. As a result, they don't force overtime on you (because it doesn't help the company). I have friends in other industries that are paid on salary and expected to work 50,60, 70 hour weeks without extra pay. That's just not right.
What do you like most about your job? What do you like least about your job?
Those questions have the same answer: dealing with people. Engineering is easy because if you follow the rules, things work. Dealing with people is tough because people don't follow set patterns. That makes dealing with people interesting, rewarding, and painful all at the same time.
What is an expected time line for career advancement?
The firms I've worked for expect people to advance. Entry-level engineers are expected in 5-10 years to become project/ design team managers. Depending on the size of the company, you could be a department level manager in 10-15 years and a partner in 15-20. And they get rewarded for that ambition. There is no fundamental limit to earning potential.
Did you find going through college difficult? Do you have any tips on how to adjust with the classes?
It was for me. I started off with aerospace engineering and it was too tough. A lot of my problem, though, was attention span/burnout. If I knew how to make it easier to spend 40 hours a week studying, I'd tell you, but I don't know.
Was it hard to find a job once out of college?
No. If you pick a broad enough field and cast a broad enough net when you get out of college, you should be employeed within weeks of graduation if the economy is bad and you were a bad student. If the economy is good, and/or you are a good student, you can expect to have your job lined up long before graduation.
What advice would you give a student planning on entering this career?
Do it. It's tough, but it is rewarding.
 
I hope you don't mind me using some of your answers for my class project in the class Principles of Engineering which Project Lead the Way has set up for many high schools. In which we are also required to do a report on a field of engineering of our choice, of which i choose Mechanical engineering of course. :) Thank you.
 
Posted June 2024 - 15 years after starting this class. I have learned a whole lot. To get to the short course on making your stock car, late model, hobby stock E-mod handle, look at the index below. Read all posts on Roll Center, Jacking effect and Why does car drive straight to the wall when I gas it? Also read You really have two race cars. This will cover 90% of problems you have. Simply put, the car pushes going in and is loose coming out. You do not have enuff downforce on the right...
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'
Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
I'm trying to decide what size and type of galvanized steel I need for 2 cantilever extensions. The cantilever is 5 ft. The space between the two cantilever arms is a 17 ft Gap the center 7 ft of the 17 ft Gap we'll need to Bear approximately 17,000 lb spread evenly from the front of the cantilever to the back of the cantilever over 5 ft. I will put support beams across these cantilever arms to support the load evenly
Back
Top