Newtonian - Force, Gravity, and Bungee Jumping

AI Thread Summary
The discussion revolves around calculating the force exerted by a bungee cord when a 55kg person jumps off a bridge, experiencing a downward acceleration of 7.8m/s². The net force is determined using the equation ΣF = ma, resulting in a calculated force of -418N when considering the downward acceleration. The force of gravity acting on the jumper is 539N, leading to the conclusion that the bungee cord must exert a force of +121N to reduce the descent to the specified acceleration. The reasoning for subtracting the forces is to determine the additional force required by the bungee cord to counteract gravity and achieve the desired acceleration. This analysis highlights the relationship between gravitational force and the force exerted by the bungee cord during the jump.
staycrunchy
Messages
2
Reaction score
0

Homework Statement


A person weighing 55kg jumps off of a bridge with a bungee cord attached. The problem seeks to find the bungee cords Force vector when the acceleration is 7.8m/s2 in the downward direction.

m = 55kg
a1 = g = 9.8m/s2

To find:
F1 when a2 = 7.8m/s2 downward.

I've specified my grid as \uparrow+ \rightarrow+ so the accelerations are technically negative.

Homework Equations


\SigmaF = ma


The Attempt at a Solution


\SigmaF = ma
\SigmaF=55kg(-7.8m/s2)
\SigmaF = -418N

\SigmaF = F1 - F2
\SigmaF = 539N - 418N
Force of bungee cord acting = +121N
 
Physics news on Phys.org
Why did you subtract the forces?
 
semc said:
Why did you subtract the forces?

The 539N was the Force with F=ma and a = g. I think I forgot to write that.
The -428N was the Force with F=ma and a = 7.8m/s2.

My inclination was to subtract the forces to get the force required by the bungee cord to slow the decent to the 7.8m/s2
 
Well since gravitational force is downwards and he is traveling downwards...
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top