Newton's Second Law / Archimedes Principle

AI Thread Summary
The discussion revolves around calculating the density of a block of wood and oil based on its buoyancy in water and oil. The wood is found to have a density of 722 kg/m³, derived from the submerged volume in water. The calculations confirm that the wood's density is less than that of water, consistent with the principles of buoyancy. The method used involves applying Newton's second law and Archimedes' principle, ensuring that the weight of the displaced fluid equals the weight of the floating object. Overall, the approach and results are validated by participants in the discussion.
nxn
Messages
3
Reaction score
0

Homework Statement


A block of wood floats in fresh water with 0.722 of its volume V submerged and in oil with 0.895 V submerged. Find the density of (a) the wood and (b) the oil.


Homework Equations



mass = density x volume

f = ma

conservation of mass

F_{weight} - F_{buoyancy} = 0 when an object floats on the surface of a fluid.

density of water = 1000 \frac{kg}{m^3}

The Attempt at a Solution



ρ_{wood}(V)g - ρ_{water}(.722V)g = m\cdot0 when the block floats

so

ρ_{wood}(V)g = ρ_{water}(.722V)g

and

ρ_{wood} = ρ_{water}\frac{(.722V)g}{(V)g}

we know density of water = 1000 \frac{kg}{m^3} so

ρ_{wood} = 1000(.722) = 722 \frac{kg}{m^3}

Can you confirm that this looks correct? I've been waiting for a chance to practice with LaTeX and decided to jump in with this problem. I appreciate your time.
 
Physics news on Phys.org
Welcome to PF nxn,
nxn said:

Homework Statement


A block of wood floats in fresh water with 0.722 of its volume V submerged and in oil with 0.895 V submerged. Find the density of (a) the wood and (b) the oil.

Homework Equations



mass = density x volume

f = ma

conservation of mass

F_{weight} - F_{buoyancy} = 0 when an object floats on the surface of a fluid.

density of water = 1000 \frac{kg}{m^3}

The Attempt at a Solution



ρ_{wood}(V)g - ρ_{water}(.722V)g = m\cdot0 when the block floats

so

ρ_{wood}(V)g = ρ_{water}(.722V)g

and

ρ_{wood} = ρ_{water}\frac{(.722V)g}{(V)g}

we know density of water = 1000 \frac{kg}{m^3} so

ρ_{wood} = 1000(.722) = 722 \frac{kg}{m^3}

Can you confirm that this looks correct? I've been waiting for a chance to practice with LaTeX and decided to jump in with this problem. I appreciate your time.

Yes, this looks correct. If the wood floats, it must be less dense than water, and it makes perfect sense that it would be less dense than water by a factor of 0.722, the fraction of the wood volume that had to be displaced.
 
Thanks! This ended up working out just fine.
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Back
Top