No Induced Current in a Moving Magnet?

AI Thread Summary
Induced current in a conducting loop occurs when there is a change in magnetic flux. The discussion revolves around scenarios involving a magnet and a conducting loop, analyzing which situation would not result in induced current. It is noted that a rotating conducting loop will induce current, while the effect of a rotating magnet is questioned. The key point is that if there is no change in magnetic flux, no current will be induced. Understanding the orientation of the loop and the nature of the magnetic field changes is crucial for determining induced current.
16Candles
Messages
6
Reaction score
0

Homework Statement


In which of the following will a current NOT be induced in the conducting loop?

a. Magnet moving toward upright conducting loop of wire
b. Magnet moving away from an upright conducting loop of wire
c. Magnet moving toward a horizontal conducting loop of wire
d. Conducting loop of wire rotating in front of magnet
e. Magnet rotating in front of conducting loop of wire

2. The attempt at a solution
I eliminated d because the loop is being rotated and that should trigger induced current, right?
a, b, and c seem like they would have induced current because the loop is moved into or out of the magnetic field, with either the magnet moving.

So I know that when the loop is rotated, there is induced current, but is that the same for a rotated magnet? If a rotated magnet does not trigger induced current, then would e be the correct answer?
 
Physics news on Phys.org
You need to go back to basics - how is a current induced in a loop: what has to happen as far as the magnetic field inside the loop is concerned?

I also think you need to take a closer look at what difference it makes if the loop is "upright" or "horizontal" for the purpose of this question.
 
Remember that induced currents are caused by a changing magnetic flux. Knowing that, do any of the solutions present a situation where there isn't a change in flux or there is no flux at all?
 
The magnetic field must either increase or decrease. If there is no change, there will be no current.

Okay I can see where this is getting at.. I think I need to review my right hand rules as well while I'm at it... Thank you!
 
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top