Optimizing River Crossing Time for a Hunter Using a Powerboat

AI Thread Summary
The discussion focuses on calculating the minimum time for a hunter to cross a 1.5 km wide river flowing at 5.0 km/h using a powerboat with a maximum speed of 12 km/h. The correct resultant velocity of the hunter is determined to be 13 km/h, combining the river's current and the boat's speed. The initial calculation for crossing time mistakenly used the boat's speed of 12 km/h instead of the correct resultant speed. The correct time to cross, using the resultant velocity, would be T = 1.5 km / 13 km/h, leading to a more accurate crossing time. The importance of using the correct velocity in such calculations is emphasized.
joe215
Messages
25
Reaction score
0
1. Homework Statement

A hunter wishes to cross a river that is 1.5 km wide and flows with a speed of 5.0km/h parallel to its banks. the hunter uses a small powerboat that moves at a maximum speed of 12 km/h with respect to the water. What is the minimum time necessary for crossing?


3. The Attempt at a Solution

5km/h^2 + 12Km/h^2=sq rt 169km/h^2 = 13 km/h

The hunter moves really moves at 13 km/h to the right because of the water moving upstream. 13 is the vector resultant of 5 north and 12 east.

So, T=D/V

T=width of stream/velocity of hunter
T=1.5km/12km/h = 0.125 h
 
Physics news on Phys.org
joe215 said:
1. Homework Statement

A hunter wishes to cross a river that is 1.5 km wide and flows with a speed of 5.0km/h parallel to its banks. the hunter uses a small powerboat that moves at a maximum speed of 12 km/h with respect to the water. What is the minimum time necessary for crossing?


3. The Attempt at a Solution

5km/h^2 + 12Km/h^2=sq rt 169km/h^2 = 13 km/h

The hunter moves really moves at 13 km/h to the right because of the water moving upstream. 13 is the vector resultant of 5 north and 12 east.

So, T=D/V

T=width of stream/velocity of hunter
T=1.5km/12km/h = 0.125 h

You calculate the correct velocity of the hunter (V = 13 km/h), but when you calculated his time of crossing you used V = 12 km/h.
 
If I used 13km/h instead of 12km/h, would the answer be right?
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top