Organic Chem [Napthalene and benzoic acid]

AI Thread Summary
Naphthalene and benzoic acid, both aromatic compounds, can be separated without organic solvents by utilizing their differing solubilities in water. While benzoic acid is weakly soluble in cold water, its solubility increases with temperature, allowing for recrystallization techniques. Adding sodium hydroxide (NaOH) can help dissolve benzoic acid, enabling its separation through filtration. Naphthalene remains insoluble in water, but caution is needed with temperature to avoid forming a eutectic mixture. Following these methods should yield successful results for the separation.
crays
Messages
160
Reaction score
0
Hi guys, I've got a question which i couldn't solve.

Both napthalene (two benzene ring join together) and benzoic acid are aromatic compounds which exist as white solids.

Based on their physical ahd chemical properties, describe how you could separate the components of a mixture of these two compounds without using any organic solvent.

My only guess is to use water, since benzoic acid has the carboxylic group, but again, benzoic acid is not so soluble in water right? Any other options i could use?
 
Physics news on Phys.org
Benzoic ACID is not souble in water. What substances are soluble? Like - why NaCl is soluble?

--
 
NaCl is soluble because it is ionic. oh oh, can i add NaOH ? So that the benzoic dissolve in it :) ?
 
That's what I would do :smile:

--
 
Borek said:
Benzoic ACID is not souble in water.

Actually, this may not quite be true. Depending on what you actually want to do, I think you can recrystallise benzoic acid from water.
 
Yes, it was a little bit of exagerration on my side. Let's say weakly soluble in the cold water.

--
methods
 
Thanks :) but then again, it is a 7 marks question. So by adding NaOH and filter and yield the acid back by adding acid. This would really give me the 7 marks would it @_@ ?
 
Question asks for using chemical properties, so I think yes. But I am known to be occasionally wrong :wink:

--
 
Hehe thanks borek~
 
  • #10
The solubility of benzoic acid in water is:

Temp, solubility (g/L)
0oC, 1.7
10oC, 2.1
20oC, 2.9
25oC, 3.4
30oC, 4.2
40oC, 6.0
50oC, 9.5
60oC, 12.0
70oC, 17.7
80oC, 27.5
90oC, 45.5
95oC, 68.0

Naphthalene is entirely insoluble in water, so hot filtration could be used but since naphthalene melts at 80oC, you would have to keep it way below that temperature since it is likely to form a lower melting eutectic with benzoic acid. It is likely you wouldn't be able to use temperatures of greater than 50oC to 60oC. You would have to use a LOT of warm water!

I think you will get your marks if you follow Borek's advice...
 

Similar threads

Replies
1
Views
5K
Replies
1
Views
9K
Replies
1
Views
5K
Replies
3
Views
5K
Replies
3
Views
3K
Replies
2
Views
12K
Back
Top