Percentage energy loss (mechanical energy) problem

AI Thread Summary
An object with a mass of 2.0 kg slides down a low-friction incline, reaching a speed of 2.7 m/s at the bottom from a height of 0.50 m. The problem involves calculating the percentage energy loss during this process. The initial approach used the equation mgh(0) + W(other forces) = 0.5mv^2, but the calculations did not yield the correct answer. Suggestions include ensuring the energy loss is calculated by subtracting the initial potential energy from the final kinetic energy and converting the result to a percentage. Detailed calculations are necessary to identify any mistakes in the approach.
poopandpee
Messages
1
Reaction score
0

Homework Statement


Problem: An object with mass 2.0 kg slides down a low-friction incline and its speed measured at the bottom is 2.7 m/s. The object starts sliding at a height of 0.50 m over the tabletop and its speed is measured 0.10 m over the tabletop. How big is the percentage energy loss?

Homework Equations

The Attempt at a Solution


My attempt: I've tried using this formula: mgh(0) + W(other forces) = 0.5mv2, where m=2.0 kg, h=0.4 m, and v=2.7 Then I found W(other forces) and divided it by mgh(0). However, that did not give a right answer. Any suggestions?
 
Physics news on Phys.org
The sign of the energy loss is a bit questionable but overall the approach is good. Maybe some mistake in the calculations? You didn't show them.
 
Did you remember to multiply by 100 to convert to %?
 
You shouldn't divide by the other work, if your equation above is correct you should subtract mgh(0) to get W alone
 
NateTheGreatt77 said:
You shouldn't divide by the other work, if your equation above is correct you should subtract mgh(0) to get W alone
That appears to be what @poopandpee did before dividing:
poopandpee said:
Then I found W(other forces)
As others have posted, the method sounds correct, but we need to see the details.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'A bead-mass oscillatory system problem'
I can't figure out how to find the velocity of the particle at 37 degrees. Basically the bead moves with velocity towards right let's call it v1. The particle moves with some velocity v2. In frame of the bead, the particle is performing circular motion. So v of particle wrt bead would be perpendicular to the string. But how would I find the velocity of particle in ground frame? I tried using vectors to figure it out and the angle is coming out to be extremely long. One equation is by work...
Back
Top