Periods of Light Waves: Red & Blue

  • Thread starter Thread starter jimmer
  • Start date Start date
  • Tags Tags
    Waves
AI Thread Summary
The discussion focuses on calculating the periods of red and blue light waves using the formula T=1/f. The frequency for red light is approximately 4.6x10^14 Hz, resulting in a period of about 2.17x10^-15 seconds. For blue light, with a frequency of 7.0x10^14 Hz, the period should also be calculated similarly. It's emphasized that answers should be rounded to match the significant figures of the given frequency. Clarity on formatting the final answer is also provided, ensuring precision in scientific notation.
jimmer
Messages
3
Reaction score
0

Homework Statement


Light waves have very high frequencies compared to sound. The frequency for red light is about 4.6x10^14Hz and for blue 7.0x10^14Hz. What are the periods of these two waves?


Homework Equations



T=1/f

The Attempt at a Solution


I used the equation above which is correct in my understanding is this correct?
For Red light i had an answer of 2.173913043x10^-15. I am not sure if this is right so if someone could help me.
If it does seem to be correct how would i write it down as a answer. E.G
The period for red light =2.173913043x10^-15 (S)

I know sounds stupid but just want to be clear.
Thanks in advance
Jimmer
 
Physics news on Phys.org
The equation is fine and the answer is correct.
All you need to do is lose some of those decimal places.
Give your answer to the same precision (significant figures) as the data in the question.
You were given the frequency to 2 significant figures (4.6 x 10^14) so give your answer to the same number.
Do the same for the blue light.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top