Designing and Constructing a Circuit: Getting Started

  • Thread starter Thread starter nic0la
  • Start date Start date
  • Tags Tags
    Circuit Designing
AI Thread Summary
To design and construct a circuit, start by defining its purpose. If unsure, choose a simple, practical task and consider using circuit simulation software if you lack hardware tools. Acquire a soldering iron for real-world assembly once you have a plan. Caution is advised when working with mains electricity, as it poses significant risks. Beginners should avoid transformers and large capacitors to ensure safety while learning the differences between electronic and electrical circuits.
nic0la
Messages
2
Reaction score
0
I'd like to design and construct a circuit. Where do i start?
 
Last edited:
Engineering news on Phys.org
By deciding what you want it to do.
 
By deciding what you want it to do
If you really don't know what to do, set yourself a simple task that has a practical objective then maybe think about using circuit simulating software (unless you have the hardware voltmeters, oscillascope etc) then buy a soldering iron and make it for real. Oh btw if you are thinking about doing anything that is plugged into the mains do some research first, almost gave myself a free treatment of electric shock therapy the other day ;)

EDIT: probably best to keep away from transformers and large capacitors in general to stat with
 
Last edited:
what type of circuit are trying to make electronic or electrical there is a difference
 

Thread 'Underwater piezoelectric sensor array receive sensitivity'

Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
View full post »

Thread 'Question about bonding ground and neutral'

I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...
View full post »

Thread 'Following up on the recent thread about Earth Resistance measurements'

I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
View full post »

Similar threads

When electronics engineer design/construct circuits?
Replies
11
Views
2K
DC to AC in micro- and nano- scaled electric circuits
Replies
1
Views
1K
Designing a 28V --> 200V power converter
Replies
5
Views
1K
Help me breadboard my circuit
Replies
10
Views
1K
What is the issue with my boost converter design and how can I fix it?
2
Replies
55
Views
5K
Designing a 24-100V to 12V Buck Converter Circuit
Replies
32
Views
5K
Circuit design question -- 100% transistor functionality needed?
Replies
16
Views
2K
Types of circuits that have a nonlinear response to R
Replies
29
Views
2K
DC input random offset voltage for diff. amplifier with current-mirror load
Replies
2
Views
1K
Designing circuits after 101 class
Replies
6
Views
2K

Hot Threads

Recent Insights

Back
Top