Pressure in a Lake: Find Depth for 4.5 atm

  • Thread starter Thread starter Manda_24
  • Start date Start date
  • Tags Tags
    Lake Pressure
AI Thread Summary
To find the depth in a freshwater lake where the water pressure is 4.5 atm, the equation P = a + hgp is used, where P is the total pressure, a is atmospheric pressure, h is depth, g is acceleration due to gravity, and p is the density of water. The calculation shows that h = (4.5x10^5 - 1x10^5) / (9.8 * 1000) results in approximately 35.71 meters. It's crucial to convert all pressures to pascals and ensure the density of freshwater is correctly used in kg/m³. The discussion highlights that 10 meters of water roughly equals 1 atm, suggesting that 35 meters would yield about 4.5 atm total pressure. Proper unit conversion is essential for accurate results in such calculations.
Manda_24
Messages
9
Reaction score
0

Homework Statement


At the surface of a freshwater lake the air pressure is 1 atm. At what depth under water in the lake is the water pressure 4.5 atm?

Homework Equations


P=a+hgp
h=(P-a)/(g*p)

The Attempt at a Solution


h=(4.5x105 - 1x105)/(9.8*1000)=35.71
I also did the equation with 9,000 Pa converted to atm, which I think it what I'm supposed to do but I still get the incorrect answer.
 
Physics news on Phys.org
Convert everything to pascals before using the equations. Also, be sure that the density you have for freshwater is in kg/m3. I'm not seeing anything wrong in your method, so I'm assuming the problem is in the units.
 
"h=(4.5x105 - 1x105)/(9.8*1000)=35.71" Appears to be correct. If I am not mistaken, 10 m of water is roughly = to 1 atm. But, I am not 100% sure off the top of my head. If that's the case, it would make sense that 35 m of water would be about 3.5 atm plus the 1 atm from the atmosphere = 4.5 atm.

If you know, what is the answer supposed to be?
 
Gear300 said:
Convert everything to pascals before using the equations. Also, be sure that the density you have for freshwater is in kg/m3. I'm not seeing anything wrong in your method, so I'm assuming the problem is in the units.

Thanks, I just needed to convert the top to pascals, I thought I only had to do it to the bottom.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...

Similar threads

Back
Top