This problem is driving me crazy

  • Thread starter Thread starter bossalinie786
  • Start date Start date
AI Thread Summary
The homework problem involves calculating the work done on a cart by a rope inclined at 28.5 degrees while moving on a horizontal surface. The key point is that the force from the rope has both x and y components, with only the x component contributing to the work done. The correct formula for work is W = F(cos theta) * d, where the angle affects the force applied in the direction of movement. There is confusion regarding the friction force and its relationship to the weight of the cart, which needs clarification. Understanding these components is essential for solving the problem accurately.
bossalinie786
Messages
1
Reaction score
0
this is one of my homework problems, i have attempted it twice, and the website i submit my homework to tells me it is wrong, here is the question,

A cart loaded with bricks has a total mass of 16.9 kg and is pulled at constant speed by a rope. The rope is inclined at 28.5 degrees above the horizontal and the cart moves 22.2 m on a horizontal surface. The coefficient of kinetic friction between ground and
cart is 0793.
The acceleration of gravity is 9.8 m/s2 :
How much work is done on the cart by the
rope? Answer in units of J.


since the rope is pulling is cart, and the force and the direction of the work are both going in the direction, then the angle(theta) would be zero? therefore only the x component of the force is needed, i have calculated the Friction Force which to my understand is the same as the force of the weight pulled. then i simply plug it into teh equation W=F*d and I'm not getting it right, can anyone help, it would be appreciated
 
Physics news on Phys.org
Care to show some of your work so far?

cookiemonster
 
The force of the rope and the work done by the rope are not pointing the same direction. According to the problem, the rope is inclined 28.5 degrees above the horizon and therefore has both an x and y component. The x component of the rope's force (cosine theta) is what points in the same direction as the work. W = F(cos theta)s
 
Originally posted by bossalinie786
The rope is inclined at 28.5 degrees above the horizontal ...
...
... the Friction Force ... to my understand is the same as the force of the weight pulled.
Or is it?
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top