Projectile Motion Velocity Question

AI Thread Summary
The discussion revolves around calculating the maximum height a skateboarder reaches after leaving a slanted track at a velocity of 5.4 m/s. Participants emphasize the importance of using the correct equations for projectile motion, particularly noting that acceleration due to gravity should be negative. The initial vertical velocity was calculated as 4.01 m/s, and the equation v(final)^2 = v(init)^2 + 2as is suggested for finding the maximum height. There is a focus on ensuring the height calculated is above the end of the track without needing to adjust for the initial height of 0.4 m. The conversation highlights the need for clarity on the correct approach and the expected answer to resolve any confusion.
Procrastinate
Messages
155
Reaction score
0
The drawing shows a skateboarder moving at 5.4 m/s along a horizontal section of a track that is slanted upward by 48° above the horizontal at its end, which is 0.4 m above the ground. When she leaves the track, she follows the characteristic path of projectile motion. Ignoring friction and air resistance, find the maximum height H to whioch she rises above the end of the track.

I have tried again and again to do this question but it will not work.

Found initial velocity in the y direction - 4.01.

Then I just substituted these values into the equation: v2 = u2 + 2as.

I got 0.832.

I subtracted this from 0.4 and got about 0.42m. Wrong, wrong, wrong, that was.
 
Physics news on Phys.org
good news, you correctly identified the initial velocity in the y direction.

don't forget that acceleration in your equation is negative g, because gravity is slowing down the object.

Your maximum height will be the moment that v(final) = 0, so...

v(final)^2 = v(init)^2 + 2as
0^2 = 4.01^2 + 2(-9.8)s

solve for s, and don't forget to add that to your initial height when you leave the ramp, and you will have your answer
 
I got 0.42 (approximately) but that doesn't seem like the right technique. Any other ideas on how to tackle this question?

I have tried using PE and KE to figure this out but I get the same answer.
 
Since the question asks you to
Procrastinate said:
find the maximum height H to which she rises above the end of the track.
and states
Procrastinate said:
When she leaves the track, she follows the characteristic path of projectile motion.
you can use either the constant acceleration formulas both you and EinsteinKillr stated, or the energy formula you stated. Both will work in this case. The important thing to realize here, is that they are asking for the height above the end of the track, so you won't need to add or subtract anything from the height you get from either of those techniques.

If these techniques don't seem correct to you, might you state why? Also if you have the given answer, stating what it is might help identify which technique needs to be used.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top