Projectile thrown up an incline, max distance?

AI Thread Summary
A ball thrown up an inclined plane at an angle \(\phi\) with an initial speed \(V\) can achieve a maximum range \(R_{max} = \frac{V^2}{g(1 + \sin{\phi})}\). The discussion focuses on deriving this maximum range by optimizing the angle \(\theta\) at which the ball is thrown relative to the incline. The calculations involve differentiating the range equation with respect to \(\theta\) and substituting the optimal angle \(\theta = \frac{\pi}{4} - \frac{\phi}{2}\). A participant expresses confusion over discrepancies between their derived formula and the expected result, indicating a need for clarity in the approach. The conversation emphasizes the importance of correct angle selection and substitution in achieving the desired outcome.
sabinscabin
Messages
11
Reaction score
0

Homework Statement



A ball is thrown with initial speed V up an inclined plane. The plane is inclined at an angle \phi above the horizontal, and the ball's velocity is at an angle \theta above the plane.

Show that the ball lands a distance R = \frac{ 2V^2 \sin{\theta} \cos{ ( \theta + \phi} ) } { g \cos^2{\phi} } from its launch point. Show that for a given V and
\phi, the maximum possible range up the inclined plane is
R_{max} = \frac{ V^2 }{ g (1 + \sin{\phi} )}

Homework Equations



F = ma

The Attempt at a Solution



I calculated the distance traveled up the incline fine. However, I'm having trouble proving the second part. I'm guessing I'm supposed to maximize R with respect to theta, so from the equation above we have:

\frac{d} {d \theta} \sin{\theta} \cos{(\theta + \phi)} = 0

\cos{( 2 \theta + \phi )} = 0

\theta = \frac{n \pi}{4} - \frac{\phi}{2}, with n = odd integer. Now plug this back into the original equation for R and I get

R_{max} = \frac{ 4V^2 \tan{\phi} }{g} \cos{ 2\phi}

I think I'm approaching this problem wrong. Can anyone give me a simpler way?
 
Physics news on Phys.org
Bright Wang said:

if you look at the last post in the thread you gave me, I already got that result. It's just that the R_max I get does not match the R max that's given in the initial problem.
 
sabinscabin said:
if you look at the last post in the thread you gave me, I already got that result. It's just that the R_max I get does not match the R max that's given in the initial problem.

Ops my bad.
 
sabinscabin said:
\theta = \frac{n \pi}{4} - \frac{\phi}{2}, with n = odd integer. Now plug this back into the original equation for R and I get

R_{max} = \frac{ 4V^2 \tan{\phi} }{g} \cos{ 2\phi}

I think I'm approaching this problem wrong. Can anyone give me a simpler way?

First, n must be 1; if it's 3 or higher, than n*pi/4 - Φ/2 would be greater than 90 degrees, and that's impossible given the geometry of the situation. So we know that the optimum angle is pi/4-Φ/2. Substituting it into the equation for R gives:

R=sin(pi/4-Φ/2)cos(pi/4+Φ/2)/cos^2 (Φ)

I've ignored the constants. Since cos(a)=sin(pi/2-a):

R=sin(pi/4-Φ/2)sin(pi/4-Φ/2)
cos(2a)=1-2sin^2 (a), so

R=(1-cos(pi/2-Φ))/2
=(1-sin(Φ))/2

You seem to have decent math skills, so getting from here to the answer should be easy.
 
you have got \theta = \pi/4 - \varphi/2
so 2sin\theta cos(\theta + \varphi) = 2sin(\pi/4 - \varphi/2) sin(\pi/4 - \varphi/2) =
2sin2(\pi/4 - \varphi/2) = [cos(\varphi/2) - sin(\varphi/2)]2

[cos(\varphi/2) - sin(\varphi/2)]2/cos2\varphi
= {[cos(\varphi/2) - sin(\varphi/2)]/cos\varphi}2
= {[cos(\varphi/2) - sin(\varphi/2)]/[cos2(\varphi/2) - sin2(\varphi/2)]}2
= {1/[cos(\varphi/2) + sin(\varphi/2)]}2
= 1/(1 + sin\varphi)
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Back
Top