What is the minium force required to pull block C out from under block B?

AI Thread Summary
To determine the minimum force required to pull block C out from under block B, one must consider the static friction between the blocks and the ground. The normal force on mass C is calculated as 9 kg multiplied by 9.8 N, resulting in 88.2 N. The static friction force between C and the ground, using a coefficient of 0.8, is 0.8 times the normal force, equating to 70.56 N. Additionally, the friction between B and C, with a coefficient of 0.5, must also be accounted for, which involves the weight of blocks A and B. Understanding the problem's components and breaking it down into manageable parts is crucial for finding the correct solution.
tucky
Messages
30
Reaction score
0
Q: There is a mass of a mass A (2kg ) sitting on top of a mass of B ( 4kg), which is sitting on top of a mass of C(3 kg). The static friction between A and B is .5; and between B and C is .5 and between C and the ground is .8. Mass B is tied to the wall. What is the minium force required to pull block C out from under block B?

A: Well I am really confused about static friction, the Normal force acting on Mass C is 9kg*9.8N=88.2 N, and is u static is .8+.3=.13, so therefore the static force is
us.* Normal force = Static force =13*88.2 = 88.2N (is that force it would take to move Mass C?)
 
Physics news on Phys.org
sorry I meant that it was .13*88.2N = 11.46N of force, that does not seem right. When you figure the static force, is that the force that it takes to move the object?
 
please read what i had to say in another thread: https://www.physicsforums.com/showthread.php?s=&threadid=6603

Especially the part about drawing a picture.

Physics is not about plugging in values into formulas and hoping the get the right answer. You must first understand what the problem entails and attack it in an ordially fashion.

Make the problem simple and break is into two parts - the friction on the bottom of C and the friction on top of C.

For the bottom of C you have the weight of the whole system times the coefficient of static friction between C and the floor. On the top of C you have the weight of A and B. times the coefficient of static friction between B and C

Now its just a matter of sum of forces in the x direction.
 
thank you so much, I was lost. You are right about drawing the pictures, it is just hard to do that on the computer.

tucky
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top