Rate of emission of alpha particle in uranium decay

AI Thread Summary
The discussion focuses on calculating the emission rate of alpha particles from uranium-238 undergoing decay into thorium-234. The user initially uses a half-life of 109 years to find the activity, resulting in an emission rate of approximately 5.56 x 10^5 Bq. However, it is pointed out that the half-life value is incorrect; the accurate half-life is 4.468 x 10^9 years. The user acknowledges this error and plans to adjust the calculation accordingly. The conversation emphasizes the importance of using the correct half-life for accurate decay rate calculations.
songoku
Messages
2,476
Reaction score
391

Homework Statement


U - 238 is undergoing alpha emission into Th - 234. U - 238 has half – life of 109 years. Calculate the emission rate of alpha when uranium has mass of 10 grams

Homework Equations


A = λN
A = A0 (1/2)n , n = t / half - life

The Attempt at a Solution


Not sure how to do it but here is my attempt:

Rate of emission of alpha = rate of decay of uranium = activity of uranium.

mass = 10 gram --> number of particle of uranium = 10/238 x 6.02 x 1023 = 2.529 x 1022

half - life = 109 years = 3.154 x 1016 s

A = ln 2 / (3.154 x 1016) x 2.529 x 1022 = 5.56 x 105 Bq

Is this correct? Thanks
 
Physics news on Phys.org
The given half life is wrong, but if you use this wrong value it is correct.
 
  • Like
Likes songoku
I searched through google and found out that the half - life should be 4.468 x 109 years. So I only need to change the value of half - life.

Thank you mfb
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...

Similar threads

Back
Top