RC circuit - Capacitor discharge

AI Thread Summary
When a capacitor discharges, the potential difference across its plates equals that across the resistor. The equation governing this process is derived from Kirchhoff's Second Law, which states that the sum of voltages in a closed loop must equal zero. The correct expression for charge over time is q(t) = Q_0 exp(-t/RC), indicating the need for a negative sign in the original equation. The discussion highlights that during discharge, dq/dt is negative, leading to a contradiction if not properly accounted for. Understanding these principles is crucial for accurately analyzing RC circuits.
jpas
Messages
45
Reaction score
0
When a capacitor discharges, the potential difference between its plates and the resistor's terminals is the same. Hence,

\frac{Q}{C}=R \frac{dq}{dt}
Solving this equation we get

q(t)= Q_{0} exp \frac{t}{RC}

Obviously, this isn't the solution. It is actually q(t)= Q_0 exp \frac{-t}{RC}. So, I'm missing a minus sign on the original equation.

But why should it be there?
 
Physics news on Phys.org
According to Kirchoff's Second Law, the sum of the voltages is equal to zero. R(dQ/dt) + (Q/C) = 0, therefore you need -R(dQ/dt) = (Q/C). I apologize for the lack of proper script.
 
Thank you.
Didn't know such laws.
 
If the capacitor discharges, then dq/dt is negative, so according toyour originial equation, Q/C which is positive equals something negative
 
This is from Griffiths' Electrodynamics, 3rd edition, page 352. I am trying to calculate the divergence of the Maxwell stress tensor. The tensor is given as ##T_{ij} =\epsilon_0 (E_iE_j-\frac 1 2 \delta_{ij} E^2)+\frac 1 {\mu_0}(B_iB_j-\frac 1 2 \delta_{ij} B^2)##. To make things easier, I just want to focus on the part with the electrical field, i.e. I want to find the divergence of ##E_{ij}=E_iE_j-\frac 1 2 \delta_{ij}E^2##. In matrix form, this tensor should look like this...
Thread 'Applying the Gauss (1835) formula for force between 2 parallel DC currents'
Please can anyone either:- (1) point me to a derivation of the perpendicular force (Fy) between two very long parallel wires carrying steady currents utilising the formula of Gauss for the force F along the line r between 2 charges? Or alternatively (2) point out where I have gone wrong in my method? I am having problems with calculating the direction and magnitude of the force as expected from modern (Biot-Savart-Maxwell-Lorentz) formula. Here is my method and results so far:- This...
Back
Top