Seeking a Decade Counter w/ 1 Input, 10 Outputs & Up/Down Clock

Zahraa17
Messages
10
Reaction score
0
Hi...can anyone tell me whether there is a decade counter which has only 1 input, 10 outputs and an up/down clock?
 
Engineering news on Phys.org
The simplest solution us using two chips, an up/down BCD counter plus a 4 line to 10 line decoder like the SN 7442A.
 

Thread '3-terminal device external modeling'

Very basic question. Consider a 3-terminal device with terminals say A,B,C. Kirchhoff Current Law (KCL) and Kirchhoff Voltage Law (KVL) establish two relationships between the 3 currents entering the terminals and the 3 terminal's voltage pairs respectively. So we have 2 equations in 6 unknowns. To proceed further we need two more (independent) equations in order to solve the circuit the 3-terminal device is connected to (basically one treats such a device as an unbalanced two-port...
View full post »
Thread 'Weird near-field phenomenon I get in my EM simulation'

Thread 'Weird near-field phenomenon I get in my EM simulation'

I recently made a basic simulation of wire antennas and I am not sure if the near field in my simulation is modeled correctly. One of the things that worry me is the fact that sometimes I see in my simulation "movements" in the near field that seems to be faster than the speed of wave propagation I defined (the speed of light in the simulation). Specifically I see "nodes" of low amplitude in the E field that are quickly "emitted" from the antenna and then slow down as they approach the far...
View full post »

Similar threads

Why are Mod-10 & Mod-5 decade counters while Mod-6 & Mod-8 not?
Replies
10
Views
4K
Linear moving switch, decade counter, chaser
Replies
49
Views
4K
Maxwell Linear Generator (Input Power < Output Power and losses?)
Replies
2
Views
527
Need a Precision Voltage Divider for -10V to 10V Input and -4V to 4V Output?
Replies
15
Views
2K
Calculating Input/Output Impedance w/ Parallel Resistors
Replies
7
Views
2K
What is the functionality of the LM3914V driver?
Replies
3
Views
2K
Testing Verilog Code - Find Reason Output Not Displayed
Replies
6
Views
5K
Can I find a BCD counter IC with separate up and down counting clock signals?
Replies
3
Views
6K
How to use a 4017 decade counter along with a 555 MONOSTABLE chip
Replies
2
Views
3K
Magnetic encoder signal processing
Replies
2
Views
1K

Hot Threads

Recent Insights

Back
Top