Simple RMS velocity question, what's wrong with my answer?

  • Thread starter Thread starter couchpotato
  • Start date Start date
  • Tags Tags
    Rms Velocity
AI Thread Summary
The calculation for the root mean square (RMS) speed of an argon atom was initially performed using the ideal gas law and the formula for v_RMS. The user arrived at a speed of 12.5 m/s, but this was identified as incorrect. The error was attributed to a misplaced factor of 1000, likely due to the conversion from kPa to Pa. Correcting this factor is essential for obtaining the accurate RMS speed.
couchpotato
Messages
2
Reaction score
0
Thread moved from the technical forums, so no Homework Template is shown
Find the rms speed for an argon atom if 1.5 mol of the gas is confined to a 5.6 liter container at a pressure of 5.5 atm.

PV = nRT
RT = PV/n
v_RMS = \sqrt (3RT/M)

= \sqrt (3PV/nM)

= \sqrt ((3 * (5.5atm * 101.325kPA/atm) * (5.6 * 10^-3 m^3) / (1.5 mol * 39.948 * 10^-3)

= 12.5 m/s

However this is apparently wrong. Can someone please tell me what I went wrong?

Thanks
 
Physics news on Phys.org
Your substitutions are correct, but you've slipped a factor of 1000 (possibly the k in kPa) in your working out. This becomes a factor of sqrt (1000).
 
Thank you!
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...

Similar threads

Back
Top