Skier skies down slope, including friction, calculate final speed

AI Thread Summary
A 50 kg skier descends a 25-degree slope, starting at 4 m/s, with a coefficient of friction of 0.12. The skier's initial energy is calculated using the equation E=KE+PE, resulting in 12,650 J. To account for friction, the work done by friction is subtracted from the total mechanical energy. After calculating acceleration and using kinematic equations, the final speed at a 60 m displacement downhill is determined to be approximately 19.6 m/s. The calculations appear to be correct, considering the effects of friction on the skier's speed.
wiggle
Messages
2
Reaction score
0

Homework Statement



A 50Kg skier skies down a 25 degree slope. at the top of the slope her speed is 4m/s and accelerates down the hill. the coefficient of friction is 0.12 between skies and snow. ignoring air resistance calculate her speed at point that is displaced 60m downhill.


Homework Equations



E=KE+PE
E=.5*m*V^2+m*g*h


The Attempt at a Solution



I believe I solved it correctly using E0=.5(50)4^2+50(9.8)(60sin(25)) and getting 12650

then setting 12650 = .5*m*Vf^2 and I'm getting Vf=22.5 m/s

However I'm unsure how to go about solving while taking into consideration the friction, since there is a non conservative force at work using KE0+PE0=KEf+PEf would get me close but not all the way there.
 
Physics news on Phys.org
The work done by friction will reduce the total mechanical energy.
 
Right.

So I've just broken it up into x and y components

Fx=Wsin25-.12(Wcos(25))=m*a

I calculated for acceleration in the x plane, and found a=3.08 m/s^2

Then I just did

Vf=sqr(2ax+V0^2)
sqr(2(3.08)(60)+4^2)= Vf= 19.6 m/s

Does this seem correct?
 
Looks good to me.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top