Solve Kinematics Fireman Question: 28.7m, 49.5°, 39.6m/s

  • Thread starter Thread starter pkossak
  • Start date Start date
  • Tags Tags
    Kinematics
AI Thread Summary
To solve the fireman question, first calculate the horizontal velocity component (Vxo) using the formula Vxo = 39.6 * cos(49.5°), which gives 25.72 m/s. The time (t) to reach the building can be found by dividing the horizontal distance (28.7 m) by Vxo, as there is no horizontal acceleration. Once t is determined, use it in the vertical motion equation y = yo + vyo*t - 0.5*g*t^2, with vyo calculated as 39.6 * sin(49.5°) = 30.112 m/s. The key is to ensure that the horizontal motion is treated without acceleration, focusing solely on the constant horizontal velocity.
pkossak
Messages
52
Reaction score
0
A fireman, 28.7 m away from a burning building, directs a stream of water from a ground level fire hose at an angle of 49.5° above the horizontal. If the speed is 39.6 m/s, at what height will the stream of water hit the building?

Got this right on the first test, and can't figure it out again right now for some reason?!

Anyway, I figured 39.6cos49.5 should be Vxo, and a = Vxo^2/28.7 m
That gives me Vxo = 25.72 m/s, a = 23.05 m/s^2
I have a suspicion that if something is wrong, it has to do with how I calculated a - am I right?

Anyway, I plugged that into x = xo + Vxo*t + 0.5*a*t^2

Then I found t, and plugged all of the numbers I have into
y = yo + vyo*t - 0.5*g*t^2

of course, vyo = 39.6sin49.5 = 30.112 m/s

I keep getting the wrong answer

Any suggestions? Thanks a ton
 
Physics news on Phys.org
The acceleration is known: It's 9.8 m/s^2 downward.

What you need to calculate is the time it takes for the water to travel the horizontal distance to the building. Then use that in your equation for vertical postion to find the height.
 
in trying to find the time that water is traveling horizontally, don't I need a horizontal acceleration?
 
Nope, there is no acceleration horizontally. It has a velocity component in the horizontal direciton which is what you need to use to find the time it takes.
 
got it, thanks a lot.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Back
Top