Solving Mechanics Problem: Forces, Eqns of Motion, Reactions

  • Thread starter Thread starter henryc09
  • Start date Start date
  • Tags Tags
    Mechanics
AI Thread Summary
A mass placed on top of a smooth hemisphere begins to slide down after receiving a small impulse, influenced by gravitational acceleration. The forces acting on the mass include gravity and the normal force, with equations of motion expressed in polar coordinates. The reaction force between the mass and the hemisphere's surface can be described as a function of the angle, and the mass will fly off when the normal force becomes zero. This occurs when the vertical height decreases by a third of the hemisphere's radius. The discussion emphasizes the need to analyze the components of forces and apply energy conservation to determine the motion accurately.
henryc09
Messages
68
Reaction score
0

Homework Statement


A mass m is placed on top of a smooth hemisphere of radius a such that \vartheta=\pi/2 (so it is basically on the top of the semicircle, with \vartheta being the angle between it and the horizontal).

It is given a very small impulse and as a result begins to slide down one side of the hemisphere under the influence of the gravitational acceleration g.

State the forces acting on the mass, giving their directions, and write down its radial and angular equations of motion in polar coordinates as long as it remains sliding on the sphere.

Find the reaction force between the mass and the surface of the hemisphere as a function of the angle \vartheta, and hence show the mass flies off the surface of the hemisphere when its vertical height has decreased by a/3.

Homework Equations


I guess that
a= -r\omega^2 r^ + r \delta\omega/\deltat \vartheta^

The Attempt at a Solution


Only just started this section of the course and so struggling to get my head around a lot of the material. The forces acting are gravity and the normal force, and so I suppose the equation of motion would be:

ma= -mgsin\vartheta + N r^ - mgcos\vartheta \vartheta^

Not sure how to express the normal force, but would I be right in saying it flies off where -mgsin\vartheta + N < -mr\omega^2

also when it's at height a/3 sin\vartheta=1/3

But yeah basically I'm just pretty confused with this topic so far so any help would be appreciated.
 
Physics news on Phys.org
You are almost there for the acceleration. Think of the sphere as an incline with continuously changing angle theta. Perpendicular to the "incline" is the radial direction and parallel to the incline is the "theta" direction. What are the components of the weight along these directions?

The mass flies off when the sphere can no longer exert a force on the mass in which case the mass is in free fall. The only force that the sphere can exert on the mass is N. So what do you think the value of N must be when the mass flies off?
 
right so when the normal force is 0 it flies off.

the component of gravity acting towards the centre is -mgsin\vartheta I think.

So the overall centripetal force which is -mr\omega^2 which equals -mgsin\vartheta\vartheta + N and so

N = -mr\omega^2 + mgsin\vartheta and so when N = 0

r\omega^2 = gsin\vartheta


not sure where to go now. I guess working out \omega as a function of \vartheta? Although not sure how I'd do that exactly.
 
Use energy conservation and v = ωR.
 
ah I see, got it now! Thanks :D
 
hw excatly did u do it??
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top