Solving the Stopping Force of an Arrow Shot into Hay

  • Thread starter Thread starter askthefool
  • Start date Start date
  • Tags Tags
    Force
AI Thread Summary
An arrow with a mass of 20 grams is shot into hay at 60 m/s and penetrates 20 cm before stopping. The average stopping force acting on the arrow was initially calculated incorrectly as 360 N. Upon reevaluation, the correct average stopping force is determined to be 180 N. The mistake was attributed to misinterpreting the work done by the stopping force, highlighting the simplicity of applying Newton's second law (F = ma) instead. This discussion emphasizes the importance of careful reading and understanding of physics problems.
askthefool
Messages
8
Reaction score
0
An arrow of mass 20 grams is shot horizontally into a bale of hay with a velocity of 60 m/s. It penetrates a debpt of 20 CM before stopping.

What is the average stopping force acting on the arrow?


I've been doing

W = -F*D
W = -(ma)*d

I'm finding a by using a kinematic equation, v (final ) ^2 = v (initial ) ^ 2 + 2 a (delta) x.

The answer I'm getting is 360 N, but that is not the correct answer. Any ideas?
 
Last edited:
Physics news on Phys.org
I'm an idiot. Never mind. I misread to work done by the stopping force. 180 is the right answer for those that care. There is no need for work at all, just a simple F = ma problem.
 
If misreading the question makes one an idiot, I'm an idiot many times over for trasngressions as an undergrad :(
 
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top