Stopping distance w human reaction time

AI Thread Summary
The discussion focuses on calculating the stopping distance of a car traveling at 26.9 m/s with a human reaction time of 0.9 seconds and a deceleration of -4 m/s². The total stopping distance is determined by first calculating the time taken to decelerate and then adding the distance covered during the reaction time. The deceleration time is found to be approximately 6.725 seconds, leading to a stopping distance of about 90.45 meters. Adding the distance covered during the reaction time of 24.21 meters results in a total stopping distance of approximately 114.66 meters. The conversation highlights the importance of correctly applying kinematic equations to solve the problem.
afa
Messages
8
Reaction score
0

Homework Statement



determine the stopping distance for a car with an intitial speed of 26.9 m/s and a human reaction time of 0.9s for an acceleration of -4m/s^2

Homework Equations



x=vt t=v/a x=x+vt+.5at^2

The Attempt at a Solution



I used the second equation to find total time by adding it to .9s then plugged that into equation 3 and added that to x of the first equation?? what am i doing wrong??
 
Physics news on Phys.org
Alright, you are going 26.9 m/s. When you stop, you take .9s before the deceleration takes place.

So, it's .9 seconds plus however much time the deceleration takes.

As such,
Alright, you are going 26.9 m/s. When you stop, you take .9s before the deceleration takes place.

So, it's .9 seconds plus however much time the deceleration takes.

As such,
(Original Velocity)/(Deceleration rate)=Total Deceleration Time
(26.9m/s)/(4m/s^2)=Total Deceleration Time
6.725 seconds= Total Deceleration Time

Stopping Distance=(Average Velocity)(Total Deceleration Time)
(.5)(26.9 m/s)(6.725 seconds)=90.45125 meters

Now, you know how much distance it takes to stop.
You have to add how much distance you covered before stopping.
(reaction time)(velocity during reaction time)=Distance traversed during reaction time
(.9 seconds)(26.9m/s)=24.21 meters

Add the two to get your answer.
24.21 meters + 90.45125 meters= 114.66125 meters

And that's your answer.
 
thank you so much, you seem to be the most helpful, do you think you could help me out on some more?
 
Certainly. How else would I postpone doing my chemistry work? And I haven't actually taken AP physics, so I suggest checking my answers that I give you. I just like math and am good at figuring stuff out.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Collision of a bullet on a rod-string system: query'
In this question, I have a question. I am NOT trying to solve it, but it is just a conceptual question. Consider the point on the rod, which connects the string and the rod. My question: just before and after the collision, is ANGULAR momentum CONSERVED about this point? Lets call the point which connects the string and rod as P. Why am I asking this? : it is clear from the scenario that the point of concern, which connects the string and the rod, moves in a circular path due to the string...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top