The Doppler Effect and Simple Harmonic Motion question

AI Thread Summary
The discussion revolves around a homework problem involving the Doppler Effect and simple harmonic motion related to a fetus's heartbeat. The first part of the problem, calculating the maximum linear speed of the heart wall using the formula Vmax = ωA, was successfully completed. However, the user encountered difficulties with the subsequent parts, specifically in calculating the frequency differences using the Doppler Effect equations. After some confusion and input from others, the user realized they needed to subtract their calculated frequency from the original frequency to find the correct answers for parts b and c. Ultimately, the user resolved their issues and thanked participants for their assistance.
hey3796
Messages
2
Reaction score
0

Homework Statement



Ok here's the problem.. a little lengthy so bear with me :) (3 parts need help w/ last two)

Expectant parents are thrilled to hear their unborn baby's heartbeat, revealed by an ultrasonic motion detector. Suppose the fetus's ventricular wall moves in simple harmonic motion with an amplitude of 1.75 mm and a frequency of 125 per minute.

(a) Find the maximum linear speed of the heart wall. Suppose the motion detector in contact with the mother's abdomen produces sound at 2,000,000.0 Hz which travels through tissue at 1.50 km/s.

(b) Find the difference between the original frequency and the maximum frequency at which sound arrives at the wall of the baby's heart.

(c) Find the difference between the original frequency and the maximum frequency at which reflected sound is received by the motion detector. By electronically "listening" for echoes at a frequency different from the broadcast frequency, the motion detector can produce beeps of audible sound in synchronization with the fetal heartbeat.

Homework Equations



ω=2pi(f) where w is angular freq. and f is freq
vmax=ωA
f'= (v+vo/v) and f"= (v/v-vs) where vs is the speed of sound

The Attempt at a Solution



Ok so for part a) I determined Vmax by using Vmax=wA. No problem there. cool.

Parts b) and c): this is where it gets really frustrating!

For part b) I thought ok were doing the doppler effect. The question asks for the DIFFERENCE between FREQUENCIES. Ok, easy enough. NOT

The answer is going to be in HZ. The sound travels through the tissue @ 1.50 km/s @ a frequency of 2000000.0 HZ and a max speed of .022925 from part a).

I used the equation f'= f(v+vo/v)= 2000000.0Hz((1500m/s + .022925m/s)/(1500m/s).
Right? WRONG!

Plz help me... I am really stumped. What am I missing here?

 
Physics news on Phys.org
so you say that

MaxVelocity = 2*PI*Frequency*Amplitude

so that would be

2*3.14*(125/sec)*0.00175metres

I don't get the same figure as you do
 
i didnt have any issues with that part.

I was having problems with the last two parts but i figured it out. I simply forgot to subtract the answer i got from the original frequency (2000000 HZ)

SOLVED!

thnx for your input
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top