The focal length of a mirror. Help me maybe?

AI Thread Summary
The discussion revolves around calculating the focal length of a mirror given a 2.0-cm-tall object and a 1.0-cm-tall upright image formed 180 cm from the object. Participants clarify the relationships between object distance, image distance, and magnification, noting that the image is virtual and thus the mirror is convex. The calculations lead to an object distance of 120 cm and an image distance of -60 cm, resulting in a focal length of -40 cm. There is some confusion regarding the signs and the application of the thin lens equation, but the consensus is that the focal length is negative due to the nature of the virtual image. The final conclusion is that the focal length of the convex mirror is -40 cm.
spaghed87
Messages
24
Reaction score
1

Homework Statement


Mastering physics problem 23.76 difficulty rating: two bars=difficult

A 2.0-cm-tall object is placed in front of a mirror. A 1.0-cm-tall upright image is formed behind the mirror, 180cm from the object.

What is the focal length of the mirror?


Homework Equations


hi / di = ho / do

Thin lens equation
1/o + 1/i = 1/f


The Attempt at a Solution


I made a previous attempt but I know why that was wrong. However, if I can see that the object is 2.0cm high and then its image is 1.0cm high. Does that imply that the distance of the object to the mirror is 180cm times 2 = 360cm so its image is 540cm from the mirror. I understand I can use the height ratio to find the magnification. I just cannot see how I can find the obj distance or image distance. I still have 1/o + 1/i = 1/f and it is impossible to solve this equation when I still have three unkowns. :cry:
 
Physics news on Phys.org
Hey

check this:
http://img47.imageshack.us/img47/7376/mirrorgs9.jpg

ok so you focal distance is going to be 160cm
because we can say that the 180=3x
and the ratio between the sizes of the two objects is 2:1
 
Last edited by a moderator:
Wow, thanks for the figure. My online homework still said that the answer of 160cm was still the wrong answer. I believe it is because we need to consider the thin lens equation after finding the obj and img distance. I cannot see how you are getting the focal length to be 160cm? I'd be happy if you would just be able to help me get the object distance or image distance to the mirror. I'm not sure if I can see why you set 180cm=3x. Is that because of the three unknowns? That is the wrong way to go about doing it if so.
 
ok, answer is 40cm.
x=dist from mirror to obj.
x'=dist from mirror to image.
m=magnification
L=vergence before reflection
L'=vergence after reflection
F=power of the mirror
y=object height
y'=image height
f=primary focal point
F=-1/f or f=-1/F
F+L=L'
m=y'/y & x'/x
L=1/x
L'=1/x'

abs(x)+abs(x')=180cm
y'/y=1/2=m=x'/x
so, x'/x = 1/2
abs(x)=abs (2x') (substitution from equation above)
abs(2x')+abs(x')=180cm
abs(3x')=180cm
abs(x')=60cm
so...abs(x)=120cm (180-60)
ok the problem said image was on opposite side of the mirror from the obj, so that would make x' a negative number. In mirrors, real images are on the same side of the object. In this case the image is virtual.
so...
x=120cm
x'=-60cm
L=1/1.2m=.83333 D (diopters)
L'=1/-.6m=-1.66666 D
F=-2.5 D (L'-L)
f=-1/-2.5=.4m or 40 cm
fun problem!

B. Woolverton, O.D. to be
 
Last edited:
40cm isn't right either, unfortunately. And I don't have the answer just yet! Hopefully, I'll have a solution by tomorrow!
 
An upward image means that the image is virtual. If it is a concave mirror, the virtual image is bigger than the object. So the mirror in the problem is convex. Therefore the focal length is negative, the image distance is negative. |i|+o=180, |i|/o=0.5, that is o=120 and i=-60. Plug into the lens/mirror equation.

ehild
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top