Thermodynamic Problems: Work and Heat in a Thermodynamic Process

AI Thread Summary
The discussion revolves around calculating the work associated with a thermodynamic process involving an ideal gas. The gas undergoes cooling at constant volume and then expands at constant pressure, with initial and final states provided. The participant attempts to calculate work using the formula W = -P * deltaV but faces issues with significant figures and clarity on the sign convention. There is a consensus that while the method is correct, attention to detail in units and context is crucial for accurate results. The conversation emphasizes the importance of precision in thermodynamic calculations.
yuvlevental
Messages
44
Reaction score
0

Homework Statement


Initially, 0.745 moles of an ideal gas in a container occupies a volume of 3.55 L at a pressure of 3.82 atm with an internal energy of 1705 J. The gas is then cooled at a constant volume until its pressure is 2.06 atm. Then the gas is allowed to expand at a constant pressure until its volume is 6.65 L. The final internal energy is 2098 J. Consider the processes to be quasi-static. What is the work associated with this entire process?

Homework Equations


W=-P*deltaV
deltaU=Q + W

The Attempt at a Solution


Is it correct that you take the 2.06, multiply it by 1E5, and multiply the answer by the change in volume in m^3 to find -638.60 J
 
Physics news on Phys.org
Yes and no. Your method is correct, but your answer has too many sig figs.
 
yuvlevental said:
What is the work associated with this entire process?
Other than sig figs, the use of prepositions matters. Work done on what by what? I think that there is a sign uncertainty here.
 

Thread 'Struggling to understand the concept of this question (ice cube in water optics question)'

TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
View full post »
Thread 'Variable mass system : water sprayed into a moving container'

Thread 'Variable mass system : water sprayed into a moving container'

Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
View full post »

Similar threads

Thermodynamics: Internal Energy, Heat and Work Problem
Replies
1
Views
2K
Thermally insulated container with alternating series of walls
Replies
49
Views
2K
Thermodynamics: gas expansion formula or approximation error?
Replies
2
Views
1K
Thermodynamics: calculating work question
Replies
6
Views
2K
Work done on container receiving gas from high pressure container
Replies
1
Views
1K
Why is PV work in thermodynamics so difficult to understand?
Replies
3
Views
2K
Recognizing Thermodynamic Scenarious (Work Done)
Replies
5
Views
1K
Thermodynamics problem (ideal gas law, kinetic theory, processes, etc.)
Replies
18
Views
2K
Closed cycle of an ideal gas
Replies
3
Views
1K
Thermodynamics Problem: Reversible and Irreversible Processes
Replies
1
Views
2K

Hot Threads

Recent Insights

Back
Top