Thermodynamics / micro/macro connection problem

AI Thread Summary
A user is attempting to calculate the rate of collisions of nitrogen molecules against a wall of a box, using thermodynamic principles. They initially calculated the root mean square speed and the number of nitrogen molecules but received an incorrect answer from the Mastering Physics system. After discussion with peers, they realized they needed to use the average velocity equation to find the correct average speed for the molecules. The user concluded that the expected answer should be on the order of 10^24 collisions per second, while the system erroneously accepted a value closer to 10^25. The conversation highlights the importance of using the correct equations in thermodynamic calculations.
greenskyy
Messages
17
Reaction score
0

Homework Statement


A 10 cm * 10 cm * 10 cm box contains .01 mol of nitrogen at 20 degrees C.
What is the rate of collisions (collisions/s) on one wall of the box?

Homework Equations


\frac{N_{coll}}{t}=\frac{NAv_{x}}{2V}

v_{rms}=\sqrt{\frac{3k_{B}T}{m}}

The Attempt at a Solution


I'm really banging my head on the desk with this one. So far, I've calculated the following information.

T = 20 degrees C = 293 degrees K

N = .01 mol * avogadros constant = 6.02*10^{21} particles.

Nitrogen is diatomic, so the molecular mass is 28u.

m = molecular mass / avogadros constant = 4.65*10^{-26} kg

v_{rms}=\sqrt{\frac{3k_{B}T}{m}} = 511 m/s

Plugging this into the first equation given

\frac{N_{coll}}{t}=\frac{NAv_{x}}{2V} = \frac{Nv_{x}}{2*.1} = 1.54*10^{25}

This answer is incorrect according to masteringphysics, and I have no ideas from here. If anyone could offer some suggestions I would be very grateful.
 
Physics news on Phys.org
Thanks for the help everyone... =\

I figured it out after talking to some other students today. I was lacking one equation:

(v_{x}^{2})_{avg}=\frac{v_{rms}^{2}}{3}

Good luck on this problem for whoever needs this :D
 
I happen to also be working on this problem. In your last equation it is possible to get:

(v_{x})_{avg}=sqrt(\frac{v_{rms}^{2}}{3})

Do you plug this into this equation:

<br /> \frac{N_{coll}}{t}=\frac{NAv_{x}}{2V}<br />

for (v_{x})? I tried doing this and came up with the wrong answer. I assume the number of collisions per second would be an average of all of the molecules hitting the wall, however Mastering Physics would have me believe that I am wrong in this regard.
 
Yes, that's what you do. The mastering physics system has the incorrect answer stored as well, as if the number of moles were .1 rather than .01. The "true" answer should be to the magnitude of 10^24, while the one accepted by mastering physics is 10^25.
 
Alright, thanks. That problem was giving me many problems as well, and I am glad that forums such as these exist!
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Back
Top