How Fast Can an Elevator Lift a 1000 kg Load with 2000 W of Power?

  • Thread starter Thread starter desichick07
  • Start date Start date
  • Tags Tags
    Thermodynamics
AI Thread Summary
An elevator motor producing 2000 W can lift a 1000 kg load by using the relationship between power, force, and velocity. The relevant equations include P = Fv and W = Fd, where force is calculated as F = mg. By substituting the values into the equations, the velocity can be determined. The discussion highlights the realization that distance over time (d/t) is equivalent to velocity, simplifying the problem. Ultimately, the calculations confirm how to derive the lifting speed from the given power and load.
desichick07
Messages
18
Reaction score
0
Thermodynamics -- simple question

Homework Statement



An elevator motor prouces 2000 W of power. How fast ( in m/s) can it life a 1000 kg load?

Homework Equations



W = Fd
P = W / t


The Attempt at a Solution



by rearranging the formula i got:
W = Fd / t

d / t = W / F

but I'm not sure how to get the force, since it needs to be in N and i am only given kg.
 
Physics news on Phys.org
P=FV (force times velocity) This is also a handy equation.

P=mg(v)

2000= (1000)(9.8)(v)

Solve for V.
 
Thanks a million.

But just out of curiosity is there a way to do it just using the equations W = Fd and P = W/t ?
 
Never mind i realized what you are doing is the same thing...d/t (distance/time) is velocity. You just replaced d/t with V. Wow that was a stupid question.
But thanks again for the help.
 
P = \frac{Fd}{t}

F = ma (in Newtons)

F = W = mg (in Kg)

Hence...

P = \frac{mg \cdot d}{t}

Which leads one to see...

\frac{d}{t} is how fast it can lift the load.

CS
 
Opps...too late.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top