Trouble with a classic statics problem

  • Thread starter Thread starter Candalite
  • Start date Start date
  • Tags Tags
    Statics
AI Thread Summary
The problem involves a system of three weights (2 kg, 2 kg, and 3 kg) connected by pulleys, with two unknown angles at the central pulley. The goal is to determine these angles while ensuring the system is in static equilibrium. Initial attempts to resolve the forces using components led to confusion, particularly in balancing the x and y components of tension. Ultimately, the solution was found by recognizing that tension influences acceleration, allowing for the establishment of equilibrium conditions. The problem highlights the importance of correctly setting up force diagrams in statics problems.
Candalite
Messages
2
Reaction score
0

Homework Statement


You are given three weights and 3 pulleys. Each mass hangs below a single pulley, and the pulleys are all connected by strings. The middle weight is 3 kg, the other two are each 2 kg. There are two unknown angles at the central pulley, with respect to the horizontal such that the lines connecting to the other pulleys would form the hypotenuse of a right triangle.

Essentially it's this: http://forums.xkcd.com/viewtopic.php?f=18&t=45987 only the angles are unknown, and the masses are changed to what I have listed above.

I have to find the angles if the system is at static equilibrium.

Homework Equations


None

The Attempt at a Solution


I tried breaking it down into force components, but something isn't right.

I figured the tensions would be 2g, 2g, and 3g all told, and that I'd need the components for the "v" shaped lines. I ended up with 2gcos(theta)-3gcos(theta)+3gcos(theta)-2gcos(theta) for the sum of the x components, and 4gsin(theta)-3gsin(theta) for the y components, but this does not work out correctly. I am now completely lost, and have no idea how to properly set up the force diagram to solve the equation.
 
Physics news on Phys.org
I solved the problem. I remembered that tension in the system causes acceleration in a given direction if the force (in this case, just the mass) of the system is greater (or lesser) than the tension. So I found the equilibrium for that.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top