Uncertainty of Time | Atomic Clocks & Pulsars

  • Thread starter Thread starter GingerBread27
  • Start date Start date
  • Tags Tags
    Time Uncertainty
AI Thread Summary
Time standards are currently based on atomic clocks, with pulsars emerging as a potential alternative due to their stable rotation rates. A specific pulsar rotates every 1.424 806 448 872 75 2 ms, which allows for precise time measurement. Calculations show that this pulsar rotates approximately 1.27 billion times in 21 days and takes about 1424.8064 seconds for 1 million rotations. Uncertainty in these measurements can be determined using error propagation formulas, which simplify for single dimensions. The discussion highlights confusion regarding the calculation of uncertainty, suggesting a need for clearer methods.
GingerBread27
Messages
108
Reaction score
0
Time standards are now based on atomic clocks. A promising second standard is based on pulsars, which are rotating neutron stars (highly compact stars consisting only of neutrons). Some rotate at a rate that is highly stable, sending out a radio beacon that sweeps briefly across Earth once with each rotation, like a lighthouse beacon. Suppose a pulsar rotates once every 1.424 806 448 872 75 2 ms, where the trailing 2 indicates the uncertainty in the last decimal place (it does not mean 2 ms).
(a) How many times does the pulsar rotate in 21.0 days?
The answer is 1.27e9
(b) How much time does the pulsar take to rotate 1.0 x 10^6 times? (Give your answer to at least 4 decimal places.)
The answer is 1424.8064 seconds
(c) What is the associated uncertainty of this time?

For this problem I am unsure of how the uncertainty is calculated. I understand parts a and b but not C. Please help.
 
Last edited:
Physics news on Phys.org
I think your answer to b) is off.

It's rotating once every 1.424 806 448 872 75 2 ms. so for it to rotate 1.000 time plus 0.0106 times, you're definitely not going to be in the 1400 second range.

That's about 20 minutes to go a little more than it was going in beyond less than a second. Recalculate that and you should get a better start for finding the uncertainty.
 
This answer is the right answer, but it should say: How much time does the pulsar take to rotate 1.0 X 10^6 times?
 
Use the error propogation formula:
s = \sqrt{ \left( \frac{\delta u}{\delta x} \right)^2_{y,z}s_x^2 + \left( \frac{\delta u}{\delta y} \right)^2_{x,z}s_y^2 + \left( \frac{\delta u}{\delta z} \right)^2_{x,y}s_z^2 }
This is the 3 dimensional [x,y,z] form of the equation. In this case you only have a single dimension, so, it simplifies to
s = \sqrt{ \left( nt \right)^2 s_t^2 }
where s is the total uncertainty, n is number of cycles, t is cycle time and s sub t is uncertainty per cycle.
 
I get some incredibly odd answer. I think this problem has a simple way that it should be solved and I just don't know what it is.
 
last minute hope lol can anyone help?
 
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top