Understanding Joule's Law and Power: How Does It Relate to Heat and Resistance?

  • Thread starter Thread starter I&Tstudent
  • Start date Start date
  • Tags Tags
    Law Power
AI Thread Summary
Joule's law defines the relationship between heat (Q), current (I), resistance (R), and time (t) as Q=I^2*R*t, indicating that heat generated is proportional to resistance when current and time are constant. When resistors are connected in series, the total resistance increases, leading to greater heat generation compared to parallel connections, where total resistance decreases. Power is described as the rate of change of energy, linking energy to heat generation. The discussion clarifies that total resistance in parallel is indeed less than in series. Understanding these principles is crucial for analyzing electrical circuits and their thermal effects.
I&Tstudent
Messages
3
Reaction score
0
Hello, i want to ask 2 questions:
1-what is the difference between joule's heat and power?
2-We have 2 different resistors.How joule's heat ,which is created in them, will change if they connect to a steady voltage source:(a)in series,(b)in parallel
Thank you
 
Physics news on Phys.org
What are your thoughts on the subject?

Is Joule's heat just energy or something else? How does energy relate to power?


Also, how is total resistance affected when resistors are in series/parallel?
 
total resistance in series is Rt=R1+R2+...+Rn and in parallel 1/Rt=1/R1+1/R2+...+1/Rn.
Joule's law sais Q=I^2*R*t where Q the heat generated by a constant current.If (I) and (t) are constant Q is proportionate to R so in series Q will increase more than when the resistors are in parallel.Correct?
 
I&Tstudent said:
total resistance in series is Rt=R1+R2+...+Rn and in parallel 1/Rt=1/R1+1/R2+...+1/Rn.
Joule's law sais Q=I^2*R*t where Q the heat generated by a constant current.If (I) and (t) are constant Q is proportionate to R so in series Q will increase more than when the resistors are in parallel.Correct?

Wouldn't the total resistance in parallel be less than in series?
 
rock.freak667 said:
Wouldn't the total resistance in parallel be less than in series?
thats what i said
 
I&Tstudent said:
thats what i said

Sorry I read that incorrectly. But you are correct.

and remember that power is the rate of change of energy.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top