Understanding Specific Heat Units (hg-C)

AI Thread Summary
The discussion centers around the confusion regarding the specific heat of air being expressed as 1.05 kJ/hg-C. Participants clarify that specific heat is typically represented in kJ/(kg·C) or kJ/(kg·K), indicating a potential typographical error with "hg" likely being a mistake for "kg." It is emphasized that the correct units for specific heat should reflect energy per unit mass per unit temperature. Additionally, the mention of J/C pertains to heat capacity rather than specific heat. Overall, the consensus is that the original unit notation is incorrect and should be revised.
scumbum22
Messages
6
Reaction score
0
Hopefully this is a really simple question to answer. A problem I have uses the following information:

The specific heat of air = 1.05 kJ/hg-C.

Does anyone know what the hg-C stands for? I know specific heat is usually expressed in terms of J/C, so this is confusing me.
 
Science news on Phys.org
The units of specific heat are energy per unit of mass per unit of temperature. Thus it should read kJ/(kg C). I think you misread the unit and ended up with hg instead of kg.
 
Nope, I double checked and the units are definitely kJ/(hg-C). Any ideas as to what the hg may be? Is it some reference to mercury?
 
It doesn't refer to mercury. Let's say it's a typing mistake. I stand by my previous post
 
The specific heat of air is of the order of 1 kJ/kg.K (or kJ/kg.C). The exact value depends on temperature. So it is a typo, no doubt.
The units J/C (asuming C stands for Celsius degree) are for heat capacity and not for specific heat.
 
Thread 'Thermo Hydrodynamic Effect'
Vídeo: The footage was filmed in real time. The rotor takes advantage of the thermal agitation of the water. The agitation is uniform, so the resultant is zero. When the aluminum cylinders containing frozen water are immersed in the water, about 30% of their surface is in contact with the water, and the rest is thermally insulated by styrofoam. This creates an imbalance in the agitation: the cold side of the water "shrinks," so that the hot side pushes the cylinders toward the cold...

Similar threads

Replies
28
Views
3K
Replies
4
Views
2K
Replies
7
Views
3K
Replies
2
Views
2K
Replies
7
Views
18K
Replies
9
Views
3K
Replies
4
Views
15K
Replies
6
Views
2K
Back
Top