Understanding the Tuned Circuit Function

  • Thread starter Thread starter alanveron
  • Start date Start date
  • Tags Tags
    Circuit Function
AI Thread Summary
The tuned circuit function refers to the exchange of stored electromagnetic energy at a natural frequency, which is fundamental in various applications such as filters, transformers, and rectifiers. The discussion highlights the need for clarification on the specific type of circuit in question to provide a more focused explanation. Understanding the principles of operation can help in grasping how these circuits function in different contexts. The conversation emphasizes the importance of identifying the specific application to better understand the tuned circuit's role. Overall, tuned circuits are essential for efficient energy transfer and signal processing in electronic systems.
alanveron
Messages
45
Reaction score
0
May i know how's the tuned circuit function?
 
Engineering news on Phys.org
Huh? There are several things that this could mean: filter (both active and passive), transformer, rectifier, etc. Please clarify. Is there a specific circuit that prompted this question?

I guess I could generalize and say that the principle of operation is the exchange of stored electromagnetic energy at a natural exchange rate (frequency).
 

Thread 'Underwater piezoelectric sensor array receive sensitivity'

Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
View full post »

Thread 'Following up on the recent thread about Earth Resistance measurements'

I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
View full post »

Thread 'Question about bonding ground and neutral'

I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...
View full post »

Similar threads

Explicit Calculation of Q Factor of Loaded Tuned Circuits
Replies
9
Views
2K
Types of circuits that have a nonlinear response to R
Replies
29
Views
2K
Electronic Keyboard Goes Out Of Tune
Replies
10
Views
1K
Manual frequency tuning of a sapphire resonator
Replies
2
Views
855
I am trying to stabilize laser frequency with PID controller
Replies
14
Views
2K
DC to AC in micro- and nano- scaled electric circuits
Replies
1
Views
1K
Discussing Stagger tuning in VHF receivers....
Replies
44
Views
5K
Discussing primary resistance of a double-tuned ciruit
Replies
29
Views
4K
How Is a Power Recliner Wired for Multiple Functions?
Replies
4
Views
2K
Question related to circuit for actuating Fuel Injector
Replies
10
Views
2K

Hot Threads

Recent Insights

Back
Top