Using a Lower Rated Adapter: Potential Damage to Laptop and Battery?

  • Thread starter Thread starter dunav
  • Start date Start date
  • Tags Tags
    Stupid
AI Thread Summary
Using a lower-rated adapter (19.5v 3a instead of 19.5v 4.7a) for a laptop can pose risks, including potential damage to both the adapter and the laptop. The lower amperage may lead to the adapter being overloaded, which could result in failure. If the adapter fails, it has the potential to damage the laptop or its battery. While the battery may charge more slowly, the risks associated with using an inadequate power supply outweigh the benefits. Caution is advised when considering using a lower-rated adapter.
dunav
Messages
1
Reaction score
0
So, I find myself without the AC adapter for my laptop and I need power.

My adapter is rated 19.5v 4.7a.

I have an adapter from an older machine (same manufacturer), rated 19.5v 3a.

The physical connection to the laptop is the same.

Will I damage the laptop and/or the battery if I use this lower rated adapter?

Or will the battery simply charge slower?
 
Engineering news on Phys.org
Insufficient information to tell you anything certain.

There is a good possibility you would damage the lower power adapter as it gets overloaded.
If the adapter fails it could damage the computer.
 
Very basic question. Consider a 3-terminal device with terminals say A,B,C. Kirchhoff Current Law (KCL) and Kirchhoff Voltage Law (KVL) establish two relationships between the 3 currents entering the terminals and the 3 terminal's voltage pairs respectively. So we have 2 equations in 6 unknowns. To proceed further we need two more (independent) equations in order to solve the circuit the 3-terminal device is connected to (basically one treats such a device as an unbalanced two-port...
suppose you have two capacitors with a 0.1 Farad value and 12 VDC rating. label these as A and B. label the terminals of each as 1 and 2. you also have a voltmeter with a 40 volt linear range for DC. you also have a 9 volt DC power supply fed by mains. you charge each capacitor to 9 volts with terminal 1 being - (negative) and terminal 2 being + (positive). you connect the voltmeter to terminal A2 and to terminal B1. does it read any voltage? can - of one capacitor discharge + of the...

Similar threads

Back
Top