Time to Reach Maximum Height of Projectile Launched at 450 m/s

  • Thread starter Thread starter Gughanath
  • Start date Start date
  • Tags Tags
    Time Velocity
AI Thread Summary
To determine the time it takes for a bullet shot vertically at 450 m/s to reach maximum height, the formula v = u + at is used, with initial velocity (u) at 450 m/s and acceleration (a) as -10 m/s² or -9.81 m/s² depending on the calculation method. The first participant calculated 45 seconds using -10 m/s², while another participant arrived at 46 seconds using -9.81 m/s². Both calculations are valid, reflecting the slight difference in gravitational acceleration values. The discussion confirms the importance of understanding the impact of gravity on projectile motion. Overall, the time to reach maximum height is approximately 45 to 46 seconds, depending on the gravitational constant used.
Gughanath
Messages
118
Reaction score
0
Hi...I done a question on velocity-time...I just wanted to amke sure if I am right...the question is: A soldier shoots a bullet vertically into the air at 450 m s^-1. How long does it take for bullet to reach maximum hight...air resistance can be ignored...so I used v=u+at, my final answer was 45 seconds..am I right...please reply anyone :rolleyes:
 
Physics news on Phys.org
Assuming you're using 10 m/s^2 for g, yes.
 
I second that. You're doing okay.
 
Thanks a lot.
 
dude i just did that same question for homework but i got 46s cos i used -9.81m/s2 for acceleration :D
 
Last edited:

Thread 'Rolling without slipping on a curved surface'

Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
View full post »
Thread 'Voltmeter readings for this circuit with switches'

Thread 'Voltmeter readings for this circuit with switches'

TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
View full post »
Thread 'Trying to understand the logic behind adding vectors with an angle between them'

Thread 'Trying to understand the logic behind adding vectors with an angle between them'

My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
View full post »

Similar threads

How Long to Reach Maximum Height for a 70 m/s Projectile at 45 Degrees?
Replies
5
Views
2K
Find the height of a lamp based on the velocities of projectiles
Replies
40
Views
2K
Find Projectile Flight Time Given Only Maximum Height
Replies
4
Views
2K
Mechanics: calculating launch angle of projectile
Replies
36
Views
4K
Model Rocket Launch: Maximum Height, Time, and Duration Calculations
Replies
1
Views
2K
Relationship between Launch height and range of a projectile
Replies
15
Views
26K
Physics 1 Parabolic Motion Question Confusion
Replies
15
Views
1K
Optimal Angle and Horizontal Range of a Bottle Rocket Projectile
Replies
1
Views
3K
Air resistnce in projectile motion decreasing time of flight
Replies
1
Views
3K
I need opinions on a Projectile Motion problem that I made up
Replies
11
Views
2K

Hot Threads

Recent Insights

Back
Top