Velocity of Ball on a Decline Ramp

AI Thread Summary
To solve the problem of a ball rolling down a ramp and landing on the floor, it's essential to apply the conservation of energy principles, specifically the equation mgh = 0.5mv^2. This allows for the calculation of the ball's final velocity at the end of the ramp. Since mass (m) cancels out in the equation, it is not necessary to know the mass to find the velocity. The key variables to determine include the total velocity, vertical and horizontal components, time taken to descend the ramp, and the distance from the table where the ball lands. Understanding these principles will enable a solution to the challenge presented.
maja_08
Messages
2
Reaction score
0
My physics teacher gave us this challenge question as homework, and basically the entire class is struggling with it. Guidance would be much appreciated.
A ball is released, with an initial velocity of 0, on a 1 m long ramp. The ramp is set up on a table, approximately .75 m above the ground, and we have to figure out where the ball will land on the floor. Here are all of the known values we have:

Initial Velocity of ball = 0 m/s
Length of Ramp: 1 m
Angle of Ramp Relative to the Table: 13o
Max Height of the Ramp: 22 cm
Vertical Distance from the Floor to the Table: 75 cm

Variables I am trying to find:
?? = Total Velocity of the Ball at the end of the ramp
?? = Vertical and Horizontal Velocities of the Ball at the end of the ramp
?? = Time it takes for the Ball to move all the way down the ramp
?? = How far away the ball would land away from the table (The system is set up so that the ball would not bounce off the table after falling off the ramp, it would go directly to the floor)




My partner and I tried many equations, but in all of them we were missing key variables, such as the mass of the ball.



As I said above, we tried many things, but in the end we just ended up needing another variable that was not given to us.
 
Physics news on Phys.org
Have you learned conservation of energy principles (particularly mgh=\frac{1}{2}mv^{2}) yet? You can use that to solve for the velocity of the ball.
 
A good starting point will be to consider that momentum is conserved. That means that potential energy at the start = kinetic energy at the end.

Potential energy = mgh, kinetic energy = 0.5*m*v^2
 
Is the "m" in those equations the mass? Because if so, we were not given the mass, so I would have to make an estimate.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top